DIY flowbench?

[Shirley, Mark R]

Why not use a couple of big furnace blowers?  They move a lot of air.

> -----Original Message-----
> From: Eric Fahlgren [mailto:efahl at adams.com]
> Sent: Wednesday, July 11, 2001 8:15 AM
> To: diy_efi at diy-efi.org
> Subject: Re: DIY flowbench?
> 
> 
> John Dammeyer wrote:
> > 
> > I'd look at using a sawdust collection system without the 
> bags.  Those
> > centrifugal blowers are rated in CFM so it should be pretty 
> easy to spec
> > in a 650cfm or 1000cfm dust collector that can spend most 
> of it's time
> > keeping the wood working shop safe and part of the time serving as a
> > major vac source.
> 
> I've considered using a leaf blower to power one, they can pull
> quite a vacuum.  One of my kids used on once to build a wind
> tunnel of sorts for model rockets.
> 
> -- 
> Eric Fahlgren                            Mechanical Dynamics, Inc
> efahl at adams.com                          Ann Arbor, Michigan, USA
> --------------------------------------------------------------
> --------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" 
> (without the quotes)
> in the body of a message (not the subject) to 
> majordomo at lists.diy-efi.org
> 
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org