Data collection system

[Wilkie, Johnson (WLKJ)]

A little bit on the hardware please! What kind of cable setup are needed?
I'm a bit new to this world of efi.

> -----Original Message-----
> From:	Jason R. Haines [SMTP:jhaines at lingenfelter.com]
> Sent:	Thursday, July 05, 2001 11:31 PM
> To:	diy_efi at diy-efi.org
> Subject:	Re: Data collection system
> 
> Depending on the year of the vehicle, Diacom and/or the TTS software
> should
> be able to do what you are asking. I use both programs. The TTS software
> takes a bit more processing power but has more information available. The
> Diacom software works with a lot of different vehicles without having to
> buy
> another program.
> 
> Hope this helps,
> 
> Jason
> 
> ----- Original Message -----
> From: "TomQ" <zippy at tomquinn.com>
> To: <diy_efi at diy-efi.org>
> Sent: Thursday, July 05, 2001 1:42 PM
> Subject: Data collection system
> 
> 
> > Gang I am presently using the handheld EZlink Automotive Diagnostic
> > Meter by Auto Xray to scan my GM TBI system (747 chip). It has performed
> > well up to now but the snap shot approach to data collection is getting
> > tiresome. Is there a system that is not to expensive, runs on a laptop,
> > and can take a whole mess of data readings while I drive around. I would
> > like to see how the numbers look as I run the throttle up and down and
> > as the motor warms up.
> >
> > --
> > TomQ
> > SF,CA
> >
> >
> >
> --------------------------------------------------------------------------
> --
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> >
> >
> 
> --------------------------------------------------------------------------
> --
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org