Logs of individual cyl with O2+WB

[Richard Wakeling]

Hi Peter,

Peter Gargano wrote:

> Richard Wakeling wrote:
> >
> > http://www.dickselectronics.cjb.net
> >
> > We have been modifying our DST (diagnostic scan tool) to take the WB
> > signal and in the process have discovered that the good old single wire
> > O2 is capable of reading individual cylinders. Please let me know what
> > you think of the logs.
>
> Very interesting Richard. What sensor/electronics are you using for your
> WB measurements. I assume the O2 sensor is a standard GM/Bosch part?

The Sensor is the NTK 5 wire coupled to a self modified diy-uego. A life time of
electronics has certainly helped. The NB O2 is the standard single wire GM unit.

>
>
> You say, in the HTML, that ...
>
> > The engine at this point has a very bad miss and shows as a sudden lean
> > spot due to a cylinder of air entering the exhaust at that moment.
>
> I thought that if you get an IGN misfire, then you'd get a rich indication
> rather than a lean reading, or am I missing something?

Rich M answered this well. Thanks Rich.

Cheers Richard.

>
>
> Peter.
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org