Running rich

[dave.johnson at gb.abb.com]

--0__=80256A8E004429008f9e8a93df938690918c80256A8E00442900
Content-type: text/plain; charset=us-ascii


I think the signal to thr FPR is correct, but thinking about the other
pipework, if the return line to the fuel tank was restricted, then would
this also produce an above normal pressure and hence rich condition?

Dave Johnson


                                                                                        
 (Embedded     Eric Fahlgren <efahl at adams.com>@diy-efi.org                              
 image moved   19/07/2001 12:43                                                         
 to file:                                                                               
 pic00028.pcx)                                                                          
                                                                                        
                                                                                        



Please respond to diy_efi at diy-efi.org
Sent by:  owner-diy_efi at diy-efi.org


To:   diy_efi at diy-efi.org
cc:
Subject:  Re: Running rich

Security Level:?         Internal


dave.johnson at gb.abb.com wrote:

> The fuel regulator does reference MAP (it's plumbed to inlets 1 and 4)
and
> the pipework for this has been replaced as it was perished.

So, if the new pipework is suspect, then the signal may not be relayed
to the FPR properly?  This would result in above normal pressure and
a rich condition as you describe.

--
Eric Fahlgren                            Mechanical Dynamics, Inc
efahl at adams.com                          Ann Arbor, Michigan, USA
----------------------------------------------------------------------------

To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




--0__=80256A8E004429008f9e8a93df938690918c80256A8E00442900
Content-type: application/octet-stream; 
	name="pic00028.pcx"
Content-Disposition: attachment; filename="pic00028.pcx"
Content-transfer-encoding: base64

CgUBCAAAAABBADEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAABQgABAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAA=

--0__=80256A8E004429008f9e8a93df938690918c80256A8E00442900--

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org