Another use for a waste (maverick) spark coil??

[Greg Hermann]

>>I've never been able to measure the open circuit
>>voltage on the output but obviously the turns ratio
>>on the coil determines >that ultimately.
>
>I use an old TV HV probe, modified with a BNC
>connector, and a flying lead with a ground clip. Hooks
>right onto my O-scope.
>
>Lot's of interesting things can be observed.
>
>Disconnect one of the plug leads on a waste spark
>setup, watch what happens to the other side.
>
>Carter
>
Which leads me to wonder--

Hmmmm!!??!!

I wonder whether using a two lead (waste spark) coil, but not in the usual
waste spark manner (only firing one plug) might be an excellent beginning
for an ION measuring device??

Greg


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org