Maximum advance

[Bruce]

Maybe one sensor, and then try it one cylinder at a time?.
then use best average if no individual cylinder trim.
Bruce

From: "Brian Michalk" <michalk at awpi.com>
Subject: RE: Maximum advance
> If one were to use an Optrand sensor for Peak Pressure, and detonation
> detection, would one need to instrument every cylinder, or would a single
> cylinder be sufficient?
> I would lean towards the every cylinder gets a sensor solution if you had
> something like the Haltech where each injector duty cycle could be
tweaked.
> I think the ignition is fixed relative cylinder to cylinder, so that
> wouldn't be a controllable variable.


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org