Max fuel pressure for 0280 150 945

[Walter Sherwin]

> Yes it's easy to do that sort of things when you have a UEGO. To get a
nice
> flat transition between one and two banks will require a little bit of
work,
> though. You'll have to record the injection time computation parameters
and
> the lambda to see exactly what's going on during the change (I've logged
the
> relevant channels at 100Hz), then tweak the bank split parameters until
the
> transition from one to two injectors is perfectly smooth. At the end it
will
> be impossible to notice when the second bank turns on or off.
>



What manner of ramping/transition algorithm (accommodation) do they offer in
the software for when bridging the split from one bank to two?  I'd be
curious to hear more on this.....

Thanks.

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org