CNP coils

[Ira Emus]

At 02:42 AM 3/7/01 -0500, you wrote:
> >Bob, sorry I don't have the info about the pin identification.
> > Hopefully, someone can assist.

My 2000 Camaro shop manual shows the coil connections are:

A - Ground
B - Reference low  (seems to be ground in the PCM, probably ground return 
for the "Control signal")
C - Control signal
D - 12V with ignition on.

The manual indicates that the coil is fired by grounding pin C.

I hope that helps.

Ira

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org