AMP connector

[Rich M]

OK, if it's the one I think, I'll try and get some part numbers when i'm in
work next week - you may at least be able then to get some samples from AMP
or a distributor.

Rich

> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of Bernd Felsche
> Sent: 31 March 2001 08:10
> To: diy_efi at diy-efi.org
> Subject: Re: AMP connector
>
>
> Rich M tapped away at the keyboard with:
>
> > What does it physically look like Bernard? 2-row flat blade 25 or
> > 35-way maybe? If so it's probably the junior-timer range - I'll
> > have a look at some books at work next week...
>
> Two rows. Flat pins. 25-connector. There's a locating lug at one end
> and a spring catch at the other. The usual "Bosch-style" as far as I
> can tell. The spring doesn't appear to be part of the male
> connector; it's part of the bracket holding the ECU.
>
> The locking/locating lugs aren't essential but would be nice to have
> to prevent the "snooper" coming adrift while the car is being
> driven and data is collected and observed.
>
> It should be a fairly common item; VW used them for about 8 years in
> the 25-pin variety but I'm stumped as to sources for the connectors.
> (I can order the harness connector from VW at some stupefying
> markup, but the mating connector at the ECU is the real hurdle.)
>
> > Rich
>
> > > -----Original Message-----
> > > From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> > > Behalf Of Bernd Felsche
>
> > > I'm looking for some AMP connectors to build a data-capture system.
>
> > > The VW Digifant II harness connector is marked "927545 AMP" inside
> > > so I need a source of those as well as the mating ECU (male)
> > > connector. Either cable of PCB-mount.
>
> --
> Bernd Felsche - Innovative Reckoning, Perth, Western Australia
> ------------------------------------------------------------------
> ----------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without
> the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org