AMP connector

[Bernd Felsche]

Rich M tapped away at the keyboard with:

> OK, if it's the one I think, I'll try and get some part numbers when i'm in
> work next week - you may at least be able then to get some samples from AMP
> or a distributor.

Thanks a bunch. Real part numbers would be a great help.

> Rich
> 
> > -----Original Message-----
> > From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> > Behalf Of Bernd Felsche
> > Sent: 31 March 2001 08:10
> > To: diy_efi at diy-efi.org
> > Subject: Re: AMP connector
> >
> >
> > Rich M tapped away at the keyboard with:
> >
> > > What does it physically look like Bernard? 2-row flat blade 25 or
> > > 35-way maybe? If so it's probably the junior-timer range - I'll
> > > have a look at some books at work next week...
> >
> > Two rows. Flat pins. 25-connector. There's a locating lug at one end
> > and a spring catch at the other. The usual "Bosch-style" as far as I
> > can tell. The spring doesn't appear to be part of the male
> > connector; it's part of the bracket holding the ECU.
> >
> > The locking/locating lugs aren't essential but would be nice to have
> > to prevent the "snooper" coming adrift while the car is being
> > driven and data is collected and observed.
> >
> > It should be a fairly common item; VW used them for about 8 years in
> > the 25-pin variety but I'm stumped as to sources for the connectors.
> > (I can order the harness connector from VW at some stupefying
> > markup, but the mating connector at the ECU is the real hurdle.)
> >
> > > Rich
> >
> > > > -----Original Message-----
> > > > From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> > > > Behalf Of Bernd Felsche
> >
> > > > I'm looking for some AMP connectors to build a data-capture system.
> >
> > > > The VW Digifant II harness connector is marked "927545 AMP" inside
> > > > so I need a source of those as well as the mating ECU (male)
> > > > connector. Either cable of PCB-mount.

-- 
Bernd Felsche - Innovative Reckoning, Perth, Western Australia
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org