Need tips on hall sensors and distributors

[BamaInstrument]

Can you supply a number of wheels?  I have what I believe is a patentable
idea and would like to work with someone for development.

dh



----- Original Message -----
From: "Jörgen Karlsson" <jorgen.m.karlsson at home.se>
To: <diy_efi at diy-efi.org>
Sent: Sunday, April 29, 2001 10:55 AM
Subject: RE: Need tips on hall sensors and distributors


> I use a haltech S4 dual flying magnet trigger with my autronic, It
responds
> to magnets of different polarity. I use a cam wheel with five north
polarity
> magnets (five cylinders) and one south polarity magnet for the Compression
> TDC#1.
>
> I am very satisfied with my soloution.
>
> I can make CNC machined trigger wheels if you can't get a local machine
shop
> to do it at a decent price.
>
> Can you use your crank trigger together with the autronic without the
> reluctor interface?
>
> Or you could also use autronics plug wire sensor, it attaches to the #1
plug
> wire and you are all set.
>
> By the way, where do you live?
>
>
> Jörgen Karlsson
> Gothenburg, Sweden.
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org