May 2001 Archives by subject
Starting: Tue May 1 00:25:27 GMT 2001
Ending: Thu May 31 21:50:01 GMT 2001
Messages: 246
- 1989 GMC Sierra Engine Swap - 5.0L to 5.7L
Ken Richardson
- 1989 GMC Sierra Engine Swap - 5.0L to 5.7L
Shannen Durphey
- 1989 GMC Sierra Engine Swap - 5.0L to 5.7L
Ken Richardson
- [LT1edit] Any luck with Panasonic Toughbook laptops and EFI software (laptop sof
Jason R. Haines
- About softwares for ECU7
Al Lipper
- Admin
Orin
- Any ideas on numbers appreciated....
Ludis Langens
- Any ideas on numbers appreciated....
Dave
- Any ideas on numbers appreciated....
BamaInstrument
- Any ideas on numbers appreciated....
Ludis Langens
- Any luck with Panasonic Toughbook laptops and EFI software (laptop software compatibility - what laptops to use and not to use?)
Jason R. Haines
- Anyone ever think of Walbro when it comes to EFI ???
eoa at spiritone.com
- Anyone ever think of Walbro when it comes to EFI ???
Jason Haines
- Anyone ever think of Walbro when it comes to EFI ???
Jörgen Karlsson
- Anyone ever think of Walbro when it comes to EFI ???
Daniel and Laura Burk
- Bank to Bank
John Walker
- Bank to Bank
Steve.Flanagan at VerizonWireless.com
- Bank to Bank
Bruce Plecan
- Bank to Bank
Bruce Plecan
- Be aware, someone is at it again ! *** A Virus was detected in a
Mike Blakey
- bloomin virus from this list AGAIN
Ade + Lamb Chop
- Bosch O2 / Sensor ,any good ?
Dr Flowgood
- Bosch 0 280 155 752
PRD C5 EFI/ECM Research
- Bosch 0 280 155 752
Eric Fahlgren
- Bosch 0 280 155 752
PRD C5 EFI/ECM Research
- Bosch 0 280 155 752
Shannen Durphey
- Bosch 0 280 155 752
PRD C5 EFI/ECM Research
- Bosch 0 280 155 752
steve ravet
- Bosch 0 280 155 752
PRD C5 EFI/ECM Research
- Bosch 0 280 155 752
Eric Fahlgren
- Bosch 0 280 155 752
Shannen Durphey
- Bosch 0 280 155 752
marcel chichak
- Bosch 0 280 155 752
Shannen Durphey
- Bosch Ignition Modules Pinout
Axel Rietschin
- Bosch Ignition Modules Pinout
Jörgen Karlsson
- Bosch LSM11 Resistance (Ri) Curve Data? (was RE: DIY_EFI Digest V5
Dr Flowgood
- Bosch LSM11 Resistance (Ri) Curve Data? (was RE: DIY_EFI Digest V5
Eric Fahlgren
- Bosch LSM11 Resistance (Ri) Curve Data? (was RE: DIY_EFI Digest V5 #595)
Glenn & Debbie Woodhouse
- combustion pressure sensor
Rausch, Bernd
- combustion pressure sensor
Larry Heath
- AW: combustion pressure sensor
Rausch, Bernd
- AW: combustion pressure sensor
Greg Hermann
- AW: combustion pressure sensor
Matt Beaubien
- AW: combustion pressure sensor
ªL¥x¥Í
- combustion pressure sensor
Larry Heath
- combustion pressure sensor
BamaInstrument
- combustion pressure sensor
Brian Michalk
- combustion pressure sensor
Greg Hermann
- Crank trigger confession
clayb at sonic.net
- Crank trigger confession
Bob Wooten
- Crank trigger signal, runout, refrigerator magnets in the
Ron Schroeder
- Crank trigger signal, runout, refrigerator magnets in the wheel?
clayb at sonic.net
- Crank trigger signal, runout, refrigerator magnets in the wheel?
Bob Wooten
- Crank trigger signal, runout, refrigerator magnets in the wheel?
Jorgen Karlsson
- Crank trigger signal, runout, refrigerator magnets in the wheel?
Programmer
- Crank trigger signal, runout, refrigerator magnets in the wheel?
Clay B
- Crank trigger signal, runout, refrigerator magnets in the wheel?
Bob Wooten
- Crank trigger signal, runout, refrigerator magnets in the wheel?
Mike R Brown
- Damping oscillating boost gauge needle???
Chris Wilson
- Damping oscillating boost gauge needle???
Brian Renegar
- Damping oscillating boost gauge needle???
Larry Heath
- Damping oscillating boost gauge needle???
Carl Summers
- Damping oscillating boost gauge needle???
Tom Neimeyer
- Damping oscillating boost gauge needle???
pat ford
- Damping oscillating boost gauge needle???
steve ravet
- Damping oscillating boost gauge needle???
Phil Lamovie
- Dart heads - off topic (sort of)
Dan Zorde
- Dart heads - off topic (sort of)
Bob Wooten
- Dart heads - off topic (sort of)
Programmer
- Dart heads - off topic (sort of)
The Punisher
- Dart heads - off topic (sort of)
Larry Heath
- Dart heads - off topic (sort of)
Dan Zorde
- Dart heads - off topic (sort of)
Bob Wooten
- Dart heads - off topic (sort of)
The Punisher
- Dart heads - off topic (sort of)
Larry Heath
- Dart heads - off topic (sort of)
Carl Summers
- Dart heads - off topic (sort of)
Larry Heath
- Dart heads - off topic (sort of)
The Punisher
- Dart heads - off topic (sort of)
RJ Knudstrup
- Data from drag strip
Walter Sherwin
- Detonation Monitor
Hugh
- Detonation Monitor
David Hunt
- Detonation Monitor
Greg Hermann
- Detonation Monitor
David Hunt
- Detonation Monitor
Bruce
- Detonation Monitor
Jorgen Karlsson
- Detonation Monitor
Bernd Felsche
- Detonation Monitor
Jorgen Karlsson
- Detonation Monitor
Carter Shore
- Detonation Monitor
David Hunt
- Detonation Monitor
Bruce
- Detonation Monitor
David Hunt
- Detonation Monitor
Bruce
- Display Language
Wilkie, Johnson (WLKJ)
- Display Language Change
Wilkie, Johnson (WLKJ)
- diy egor jitter
rr
- DIY-EFI References
John Collins
- DIY_EFI Digest V5 #554
Shannen Durphey
- EGOR testing
bcroe at juno.com
- EGOR testing
Bruce
- EGOR testing
David Hunt
- EGOR testing
pat ford
- EGOR testing
Flanagan, Steve
- EGOR testing
Mark S. Riley
- EGOR testing
Neil.Poersch at mts.mb.ca
- EGOR testing
eoa at spartek.com
- EGOR testing
Flanagan, Steve
- EGOR testing
Brian Michalk
- EGOR testing
Mark S. Riley
- EGOR testing
breathtest2002 at juno.com
- EGOR testing
Jurgen Hartwig
- Egor Testing
David Chambers
- EGOR testing
Jeffrey A. Webb
- Egor Testing
David Hunt
- Egor testing
David Chambers
- Egor testing
David Hunt
- Egor testing
Jacky Chu
- Egor testing
Bruce
- Engine Controller
Rausch, Bernd
- FS: 500 lb/hr Aeromotive fuel pump
Clay B
- fuel pressure regulator
WAY2LO2 at aol.com
- fuel pressure regulator
Tlsalt at aol.com
- fuel pressure regulator
Drax240z
- Fw: Rod ends
PRD C5 EFI/ECM Research
- Gas price control
Dan Zorde
- Gas price control
Shannen Durphey
- Gas price control
Greg Hermann
- Gas price control
Greg Hermann
- Gas price control
Bernd Felsche
- Gas price control
Greg Hermann
- Gas price control
Warwick Anderson
- Gas price control
James Montebello
- Holley Commander 950
ABNENGINEERING at cs.com
- Horsepower calculation
Flanagan, Steve
- Horsepower calculation
Drax240z
- Horsepower calculation
Ron Schroeder
- Horsepower calculation
Greg Hermann
- Ignition module pinout.
Jörgen Karlsson
- Injector Driver.
John Dammeyer
- injectors and valve backsides cleaned after install??
Ross Corrigan
- injectors and valve backsides cleaned after install??
Shannen Durphey
- Intake manifold construction
BamaInstrument
- knock sensor
Phil Lamovie
- knock sensor
Matt Beaubien
- knock sensor
Bruce
- Manifold Construction
Jack Doe
- Manifold Construction
Grant Crockett
- Need Serial Comm port help!!!
Joe Scruggs
- Need tips on hall sensors and distributors
Jurgen Hartwig
- Need tips on hall sensors and distributors
BamaInstrument
- News from Bruce
ECMnut at aol.com
- Off Topic- Turbo Oiler
Steve Leonard
- Off Topic- Turbo Oiler
Tom Neimeyer
- OT, Cheap Tricks
BamaInstrument
- OT, Cheap Tricks
Guy Hammer
- PC card layout program, OFF TOPIC
Bob Wooten
- PC card layout program, OFF TOPIC
Will Reeve
- PC card layout program, OFF TOPIC
Mike Blakey
- PC card layout program, OFF TOPIC
Bob Wooten
- polishing intake runners worthwhile?
Axel Rietschin
- polishing intake runners worthwhile?
lance
- polishing intake runners worthwhile? & bosch high psi/high
Ross Corrigan
- polishing intake runners worthwhile? & bosch high psi/high
Ross Corrigan
- polishing intake runners worthwhile? & bosch high psi/high vol. pump info
GoodwinToo at aol.com
- polishing intake runners worthwhile? & bosch high psi/high vol. pump info
justin ivan
- polishing intake runners worthwhile? & bosch high psi/highvol. pump
Ludis Langens
- polishing intake runners worthwhile? & bosch high psi/highvol. pump
Rob O
- polishing intake runners worthwhile? & bosch high psi/highvol. pump info
Seth Bibler
- polishing intake runners worthwhile? & bosch high psi/highvol. pump info
Tom Parker
- polishing intake runners worthwhile? & bosch high psi/highvol. pump info
akallotte at juno.com
- potting compound for ECM
Jason R. Haines
- potting compound for ECM
miked-ele
- potting compound for ECM
Daniel and Laura Burk
- potting compound for ECM
Phil Lamovie
- Rod ends
Roy
- Rod ends
Eric Fahlgren
- Rod ends
Chris Wilson
- Rough running
Kris Weldy
- Rough running
rr
- Rough running
chetwagner at qwest.net
- RTEC
Stewart Prince
- RTEC: destroyed future plans ?!
The Punisher
- Serial Communication
Jack Doe
- Shielded O2 Wire
Don Burns
- Site to visit
Shannen Durphey
- Site to visit
rr
- Site to visit
Bruce Plecan
- Site to visit
Richard Wakeling
- Site to visit
Eric Fahlgren
- Site to visit
Seth Bibler
- Site to visit
Axel Rietschin
- Snowhite and the Seven Dwarfs - The REAL story!
Hahaha
- some bosch high psi/high vol. pump info
Ross Corrigan
- some bosch high psi/high vol. pump info
twsharpe at mtco.com
- sorry, off list Elec. motor Quest
Warwick Anderson
- Source for GM TPS
Rodney_L_Wiggins at KeyBank.com
- TBI Fuel Line Diameters?
Doug Dayson
- TBI Fuel Line Diameters?
Bruce
- TBI Fuel Line Diameters?
Doug Dayson
- TBI Manifold Preference...???
Doug Dayson
- TBI Manifold Preference...???
The Punisher
- TBI Manifold Preference...???
Bruce
- TBI Manifold Preference...???
Shannen Durphey
- TBI Manifold Preference...???
The Punisher
- TBI Manifold Preference...???
Doug Dayson
- TBI Manifold Preference...???
David Hunt
- TBI Manifold Preference...???
Shannen Durphey
- TBI Manifold Preference...???
twsharpe at mtco.com
- TBI Manifold Preference...???
RJ Knudstrup
- TBI Manifold Preference...???
David Hunt
- TBI Manifold Preference...???
Doug Dayson
- TBI Manifold Preference...???
Bruce
- Temp CSH, HQ Closing
Bruce Plecan
- Test
blocklm at juno.com
- Test only
Richard Wakeling
- Turbo Imp - Surge tank advice?
Dave Edge
- Turbo Imp - Surge tank advice?
Nitetrain
- SV: Turbo Imp - Surge tank advice?
espen hilde
- SV: Turbo Imp - Surge tank advice?
Dave Edge
- VSS and aftermarket
Andrew McRory
- VSS and aftermarket
steve ravet
- VSS and aftermarket
Ron Schroeder
- Water injection?
Robert Wimmer
- Water injection?
Eric Fahlgren
- Water injection?
Jorgen Karlsson
- what happened
Flanagan, Steve
- What processors/microcontrollers are used in different OE and aftermarket EFI systems?
Jason R. Haines
- Wide Band O2 Measurement
Robert Wimmer
- Wide Band O2 Measurement
rr
- Wide Band O2 Measurement
Franc Buxton
- Wide Band O2 Measurement
Bob Wooten
- Wide Band O2 Measurement
Ron Schroeder
- Wide Band O2 Measurement
Eric Bryant
- Wide Band O2 Measurement
Bruce
- Wiring harness construction technique question
miked-ele
- Wiring harness construction technique question
Bruce
- Wiring harness construction technique question
Shannen Durphey
- Wiring harness construction technique question
Brian Michalk
- Wiring harness construction technique question
Dave
- Wiring harness construction technique question
Shirley, Mark R
- Wiring harness construction technique question
Roy
- Wiring harness construction technique question
Shirley, Mark R
- Wiring harness construction technique question
David Hunt
- Wiring harness construction technique question
chris abreu
- Wiring harness construction technique question
Nic van der Walt
- Wiring harness construction technique question
David Hunt
Last message date:
Thu May 31 21:50:01 GMT 2001
Archived on: Thu May 30 05:59:29 GMT 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).