fuel pressure regulator

[Tlsalt at aol.com]

Boris wrote:

Does anyone happen to know a part # for a inline regulater with a nipple in 
and out? I can not use one the is o-ringed to the rail. It's a 40-45psi 
system. Thanks in advance.

Hello Boris,

    I know of two Bosch regulators with hose nipples.  One is adjustable from 
35-45 psi and the other is vacuum referenced and 2.5 bar (36 psi).  They both 
have 5/16" nipples at right angles with a threaded portion for the mounting 
nut.  The adjustable regulator is 0 280 160 001 and was used on Porsche 
914's, but you can buy it directly from MSD for around $40.  The vacuum 
regulator is 0 280 160 200 and it was used on Jaguar XJ-6's.  There is a 3 
bar version of this regulator but I have to dig up the number.

Paul Saltwick
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org