Wiring harness construction technique question

[Dave]

Any wiring under the bonnet I prefer to use the corrugated plasic. PVC
electrical tape tends to go hard, brittle and loses it's stick after time
with heat.  I usually support it every 12" or so where possible.  In cab
wire isnt too much of a problem with PVC tape.

Dave

>Dear Group,
>
>What is the best way to bundle and secure a very much reconstructed wiring
>harness for the GM systems.  Should I use old school thought and wrap it
>with PVC electrical tape, or should I reuse the black plastic corrugated
>tubing?    Also, how long between tiedowns / support of the wiring harness.
>Any comments would be appreciated.
>
>Mike Dekutoski
>
>---------------------------------------------------------------------------
-
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org