Dart heads - off topic (sort of)

[Programmer]

The spring coil size changes due to "lift"--so the heads are machined to
fit the "roller" springs. That's the only difference. I'd pick the roller
heads
for your TPI.

Lyndon.
----- Original Message -----
From: Dan Zorde <dzorde at erggroup.com>
To: <diy_efi at diy-efi.org>
Sent: Wednesday, May 02, 2001 6:20 PM
Subject: Dart heads - off topic (sort of)


> Hi all,
>
> Just saw an add for some Dart heads (2nd hand), advertised in the local
> paper as 1 pair suitable for roller cam and 1 pair suitable for solid cam.
> Can someone tell me what the differences would be as I thought heads were
> heads (different valve springs, retainers) ?  And could either of these be
> used with my hydraulic cam TPI 350 ?  What sort of changes would be
> required, if any ?
>
> Still learning new things every day.
>
> Dan  dzorde at erggroup.com
>
> ---------------------------- ERG Group --------------------------
>  The contents of this email and any attachments are confidential
>  and may only be read by the intended recipient.
> -----------------------------------------------------------------
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org