Rod ends
Chris Wilson
chris at formula3.freeserve.co.uk
Thu May 24 22:43:08 GMT 2001
Thursday, May 10, 2001, 12:45:57 PM, you wrote:
> Hi all
> I know this is not EFI related but as you americans
> are fortunate enough to have easy access to a wide
> range of automotive parts, where as in the UK its an
> expensive nightmare, I thought I would ask if anybody
> knows of a source for chrome moly rod ends at a
> reasonable price.
> thanks Roy
Raceparts, Wallingford, Oxon. Ask for Gary, mention my name.
01491-822000 If they don't have a suitable range they will tell you who
has. We do mainly single seaters and use NMB stainless as they last 4
times longer than other stuff, but it comes at a VERY hefty price tag.
Rose, in the UK do some budget ranges that are worth having. Beware,
there's some real *rap about.
--
Best regards,
Chris Wilson mailto:chris at formula3.freeserve.co.uk
http://www.formula3.freeserve.co.uk
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
More information about the Diy_efi
mailing list