Wiring harness construction technique question

[Bruce]

Depends on application.
For a street car, I run P clamps every 6-9"s,  tie wraps about every 6.
Usually I leave it all exposed, but for some showy stuff use the corrugated
tubing.
Bruce

> What is the best way to bundle and secure a very much reconstructed wiring
> harness for the GM systems.  Should I use old school thought and wrap it
> with PVC electrical tape, or should I reuse the black plastic corrugated
> tubing?    Also, how long between tiedowns / support of the wiring
harness.
> Any comments would be appreciated.
> Mike Dekutoski

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org