Newbie wants cheap add-on fuel injection driver for turbocharged application

[Jason Wade]

https://www.jameco.com/cgi-bin/ncommerce3/ProductDisplay?prmenbr=91&prrfnbr=
3137&cgrfnbr=501&ctgys=

sorry, here website for PWM board

Jason
----- Original Message -----
From: "Hans Conser" <conser at mcn.net>
To: <diy_efi at diy-efi.org>
Sent: Monday, November 12, 2001 12:28 PM
Subject: Newbie wants cheap add-on fuel injection driver for turbocharged
application


> Hi, I want to turbocharge my car and spend very little money doing it.
> I can get a good rising rate fuel pressure regulator for the current
> injectors but it looks like I will run out of fuel at the boost levels I
> want to run.
>
> What I would like to do is add additional injectors that come on with
> higher boost/rpm, and I was looking for an inexpensive way to do this.
>
> Any tips, suggestions or web sites are appreciated.
>
> I haven't really found anything on the website like what I am looking
> for.
>
> Is it possible to splice into the current injector harness to drive
> additional injectors?  Maybe it could the splice could have a switch
> that was regulated by boost or something.
>
> The car I plan to turbocharge is a 90 RX-7 if that matters.
>
> Thanks in advance,
>
> Hans Conser
>
>
>
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org