Fuel rail

[Bruce]

Lots of things influence how much the fuel rail pulses.
Large supply line, good regulator, and proper return lines also play a huge
part in this
Bruce



----- Original Message -----
From: "J. Scott" <ty1295 at home.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, November 20, 2001 8:33 PM
Subject: Re: Fuel rail


> it would most likely be so small you couldn't measure it..
> ----- Original Message -----
> From: "Steve Spiers" <s.spiers at xtra.co.nz>
> To: <diy_efi at diy-efi.org>
> Sent: Monday, November 19, 2001 4:10 PM
> Subject: Fuel rail
>
>
> > Hi
> >
> > Is there a significant pressure drop accross the fuel injectors in a
fuel
> rail?
> > lets say for  4 injectors in a rail? I would assume at idle there would
be
> no
> > difference but at high output there may be a slight difference.
> >
> > Steve
> >
> >
> > ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org