Correct A:F Ratio @ WOT?

[Jason Mauldin]

Exhaust Gas Temperature

It's the temperature of the air that's being pushed
out of the engine after the fuel is burned.  If you
measure it close enough to the engine then you can get
a close estimate of the temperature of the explosion
inside the engine.

--- Bert Bakker <bert.bakker at bakker-it.nl> wrote:
> Can someone explain what EGT is/stands for?
> 
> Bert
> 
>  | -----Original Message-----
>  | From: owner-diy_efi at diy-efi.org
> [mailto:owner-diy_efi at diy-efi.org]On
>  | Behalf Of Bruce
>  | Sent: donderdag 28 september 2000 5:09
>  | To: diy_efi at diy-efi.org
>  | Subject: Re: Correct A:F Ratio @ WOT?
>  | 
>  | To me, and this will vary by tuner, EGT, and a WB
> are all 
>  | I'd want, thou ion
>  | detection detonation, and cylinder pressure
> logging would be neat.  A
>  | chassis or engine dyno are fairly different then
> in actual 
>  | road conditions.
>  | 
>  
> 
> 
>
----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe
> diy_efi" (without the quotes)
> in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> 


__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org