Correct A:F Ratio @ WOT?

[Jess Gypin]

Exhaust gas temp. Measured by a probe in the manifold.

Jess
----- Original Message -----
From: "Bert Bakker" <bert.bakker at bakker-it.nl>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, October 09, 2001 14:56 PM
Subject: Re: Correct A:F Ratio @ WOT?


> Can someone explain what EGT is/stands for?
>
> Bert
>
>  | -----Original Message-----
>  | From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
>  | Behalf Of Bruce
>  | Sent: donderdag 28 september 2000 5:09
>  | To: diy_efi at diy-efi.org
>  | Subject: Re: Correct A:F Ratio @ WOT?
>  |
>  | To me, and this will vary by tuner, EGT, and a WB are all
>  | I'd want, thou ion
>  | detection detonation, and cylinder pressure logging would be neat.  A
>  | chassis or engine dyno are fairly different then in actual
>  | road conditions.
>  |
>
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org