Looking for ECU file for Winbin

[Manuel Desantos]

Thanks for the reply,
I have a 90-92 system now, which is the Speed Density.
I do have a new PROM for my car to, which I am going to 
Read and then burn to a new chip.
I just don't want to use an ECU file that is not for my car and
Reprogram the chip and maybe ruin something.

Right now, I just need to disable VATS, EGR, and maybe the VSS and use
The chip with the stock programming.

thanks

-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org] On
Behalf Of Bruce
Sent: Monday, October 11, 1999 4:26 PM
To: diy_efi at diy-efi.org
Subject: Re: Looking for ECU file for Winbin



With the 86 system you can update to the 89 calibrations to start with,
the newer the better in my book, but there are some changes that you
need to do to the hardware.  There is more info in the archives. Bruce




----- Original Message -----
From: "Manuel Desantos" <zepher at sybercom.net>
To: <diy_efi at diy-efi.org>
Sent: Thursday, October 11, 2001 12:25 PM
Subject: Looking for ECU file for Winbin


>
>
> I just received my Pocket Programmer 2 and proms the other day And am 
> looking for an ECU file for Winbin.
>
> Here is my current setup,
> 86 Trans Am 305 Tuned Port Injection with the Speed Density System.  I

> have a 5 speed transmission, no EGR, and no VATS.
>
> All the ECU files I find are for 305 automatics and I am not sure If I

> can use those.
>
> I have never programmed an eprom before, this is all very new to me. 
> What I thought was going to be a weekend carb to TPI swap has turned 
> Into a 5 month project, and this was my daily driver, so I hope to Get

> her up and running soon.
>
> Thanks,
> Any info is appreciated
>  p.s. I really miss driving my baby.
>
> Manny Desantos
> zepher at sybercom.net
> http://www.blackbird.cz28.com
>
> ----------------------------------------------------------------------
> ----
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to 
> majordomo at lists.diy-efi.org
>
>

------------------------------------------------------------------------
----
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes) in the body of a message (not the subject) to
majordomo at lists.diy-efi.org


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org