Effectiveness of RAM induction? (AFM replacement)

Phil Hunter ilphayunterhay at yahoo.com
Sat Oct 13 05:33:14 GMT 2001


Mark Agnello wrote:
> 
> > Now here is what I'm planning to do...
> > From the TB, I'll go through a hot-wire MAP.  I'll
> > have to build a circuit
> > to make the MAP look like the AFM for the ECU.  
> 
> Jeffrey,
> 
> I am interested in doing something similar.  I have
> an All Trac Turbo. Same 3SGTE engine, similar
> restricted intake path.  Have you put any serious
> effort into figuring out how to emulate the AFM with
> a hot wire MAF? I have a spare AFM and I have been
> trying to figure out how to build a calibrated test
> bench that will allow measuring voltage vs airflow
> characteristics of the stock AFM.  Any ideas?

Here's what I'd do: forget the test bench, put a GM 3"
MAF in line w/ the AFM on the car so the same air has
to flow through both, the Grams/Second vs. frequency
out of the MAF has been posted recently so that's your
calibration, use something like a PIC micro to read
both the MAF frequency and the AFM voltage(s) for
datalogging, for the adapter have the PIC drive a D/A
convertor into the ECM, you can test your adapter by
measuring the voltage difference against the AFM while
it and the MAF are both are still in the car.

You might look back at what I proposed to adapt the
DIY-WB to a NB input, since this is essentially the
same circuit idea.

phil


__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list