Lean burn engines

[Greg Hermann]

At 8:44 PM 10/17/01, Craig Dotson wrote:
>> If you have seriously "open" chamber heads--with no squish area--you're
>out
>> of luck on this one.
>
>I noticed you were running an AMC 360 V8....I'm assuming this is roughly the
>same as the Dodge 360 V8 since Chry Co bought out AMC either late 70s or
>early 80s.  If that's the case, you are IN luck.  My 88 Ramcharger with the
>318 has swirl-port heads with smaller chambers (more squish area) than the
>360 heads.

The AMC 360 is a very different animal from the Mopar "A" series 360.

The AMC V-8 engines came in something like 304/345/360/391/401 displacements.

(Also very different from and NOT to be confused with the IHC SV8's, which
came as 266/304/345/392.)

Greg


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org