Ionization Detonation Detection System

[Greg Hermann]

At 5:28 PM 10/24/01, Hugh Keir wrote:
>Hello Bruce,
>
>My eyes poped out at your words posted earlier today  "Well for openers,
>he's actions killed the ionization detonation detection project."
>
>I have been told buy Ray Hall that Autronic are working on an ionization
>detonation detection system that will integrate with the Autronic ECU's, it
>will optimise the ignition timing and fuel to provide maximum cylinder
>pressure at 15°/16° after TDC. He mentioned that the work being done was in
>cojunction with a Robert Jansen in Sweden.
>
>Is it absolutely dead, no chance of ressurection?

Hugh, unfortunately you are even further away (geographically) from being
able to mete out appropriate justice (thorough spanking and/or
horsewhipping come to mind) to the little twerp who brought this on than I
am! Not to say that such thoughts haven't crossed my mind !

Actually, I wouldn't be too surprised if I were to learn that our small
minded pal is involved with Richard Aubert (the heart of Autronics) (or
another like him) in some way, and therefore simply trying to screw up
progress on low cost DIY designs for both WBO2 and ION detection !

As far as Ray Hall and Autronics are concerned--heard any scuttlebutt as to
whether they are working on an ECU based on the Motorola 555PPC "BlackOak"
processor, or anything comparable??

Greg  (at 201 cm.,  110 Kg, can call almost anyone "little")

(And I _ALSO_ reserve the right to post _ANY_ private messages I receive to
the list!)


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org