wb lcd

[Stephen Andersen]

I could handle the mechanical drawings if you
spoon feed me the info required, as I have no idea
what kind of box and what mods will be required...

Steve

Stephen M. Andersen, P.E.                              (302) 326-6405
Technical Director                                    FAX  (302) 326-6401
AdvanTek International, LLC                     Cell   (302) 547-9842
56 Read's Way                               andersen at Advan-Tek.com
New Castle, DE 19720


> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of Bill Shaw
> Sent: Tuesday, October 23, 2001 11:07 PM
> To: diy-efi
> Subject: wb lcd
> 
> 
> I've just uploaded a file to incoming
> ftp://diy-efi.org/incoming/ called LCDSPEC.TXT which
> contains my first pass at the diy-wb lcd display firmware
> specifications.  It's a bit crude and probably won't get
> much more refined,  but it should be enough to get the idea
> across.  Please review and comment.
> 
> I could use a few good men to assist on a few items:
> 
> A CS type to help with some of the coding,  mostly in C,
> maybe a bit of PIC assembler.
> A mechanical type to do the box modification drawings
> A clerical type to back-annotate the Excel spread sheet with
> the parts list
> An Orcad V9 type to back annotate the schematic.
> 
> I have a lot of the lower level code from other projects
> that I'm using,  so I have a good jump start on the
> firmware.  The layout is almost done,  Nic van der Walt is
> doing some final tweaks,  then the gerbers will be uploaded.
> 
> Any brave volunteers please reply direct,  and please keep
> wb lcd in the subject,  it gets sorted into a different
> folder of mine.
> 
> Thanks,
> 
> Bill
> 
> --------------------------------------------------------------
> --------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" 
> (without the quotes)
> in the body of a message (not the subject) to 
> majordomo at lists.diy-efi.org
> 
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org