DIY-WB... It's alive...

[Bruce]

I'm probably as excited as you, to hear it's working...
POWWOW should be even more fun with some WBs here.
Bruce




From: "Mark S. Riley" <turbotuneusltd at triad.rr.com>
Subject: DIY-WB... It's alive...


> Got the board finished and mounted in the box to the lid like Bob R did.
Put
> the terminal strip on the top side of the lid. Got everything hooked up
and
> it heated but voltage stayed at 2.48 volt. Took it back apart and I put
the
> led in backwards and had one of the leads on capacitor C7 touching the
trace
> crossing under it. Not quite the way it's supposed to be. Repaired those
> goofs and it works!! Clean air voltage is 3.98 and sticking it in the end
of
> the tail pipe on my Escort shows voltages down to 2.2 volt just patting
the
> gas pedal. Now have to put a bung in front of the cat to get more accurate
> part throttle readings. Am going to make a two bung pipe kinda like
Bruce's
> so I can check it against Horiba driving around. Later, Mark


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org