ALDL on V6 Cavalier

[Eric Schimelpfenig]

I've got EFI live, and I am trying to get it to work, so far to no avail
----- Original Message -----
From: rr <rrauscher at nni.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, September 18, 2001 9:05 AM
Subject: Re: ALDL on V6 Cavalier


>
> I build a lot of my own tools. I do not use windows for
> anything. For 8192 baud I set the com port to a setting
> that is close, close enough to work. Don't remember the
> exact baud rate. You might want to look into Carbytes(?)
> or EfiLive. There are tools out there that can help.
>
> BobR.
>
> On Tue, 18 Sep 2001 01:21:55 +0000
>  "Eric S" <eric654321 at hotmail.com> wrote:
> > I've got the ALDL cable, and the scantool, but how did
> > you overcome the
> > setting of the baud rate?  Windows is not allowing me to
> > set a baud rate of
> > 8192, I am in the process of searching for more terminal
> > software, is there
> > a certain driver that I need for my com port?
> >
> >
> > >From: "rr" <rrauscher at nni.com>
> > >Reply-To: diy_efi at diy-efi.org
> > >To: diy_efi at diy-efi.org
> > >Subject: Re: ALDL on V6 Cavalier
> > >Date: Mon, 17 Sep 2001 09:46:26 -0400
> > >
> > >I tapped the data stream using a basic aldl to PC cable.
> > >This allowed the data to be converted to RS-232 levels
> > >that the serial port could use. Then used a terminal
> > >program to capture the data stream.
> > >
> > >It was a receive only process. I let the scan tool do
> > >all of the bidirectional talking.
> > >
> > >BobR.
> > >
> > >
> <snip>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org