interesting project, efi needed

[Tom]

looking for an EFi system to run a project car I came across.. Ran some
numbers and need something that will handle fuel and ignition on an 8
cylinder up to ~14,000 rpm. I think 120lb/hr injectors will provide
sufficient safety margins when running MeOH... Also need those injectors to
idle nicely @ 1.5ms pw.

say, how much advance would a fairly oversquare engine running 14k rpm on
methanol @ 5psi boost with relatively high static compression require
anyway? Is there an upgrade for the Megasquirt planned that would support
this application?

:-)
-tom


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org