interesting project, efi needed

[David Randall]

Other "generic systems" out there:

Wolf 3D, www.wolfems.com.au
Haltech, www.haltech.com
Electromotive, http://www.electromotive-inc.com/
SDS EFI, http://www.sdsefi.com/

Dave Randall


-----Original Message-----
From: Matt Beaubien [mailto:mrbeau0 at yahoo.com] 
Sent: Tuesday, September 25, 2001 12:45 PM
To: diy_efi at diy-efi.org
Cc: antiriced at yahoo.com
Subject: Re: interesting project, efi needed 


Tom,

Have you looked into Motec or EFI Technologies in
Torrance?  I'm not sure who else does high-end
systems.  Maybe Pectel?  Anyone else with suggestions?

Sounds like a neat project...

Matt.

--- Tom <antiriced at yahoo.com> wrote:
> looking for an EFi system to run a project car I
> came across.. Ran some
> numbers and need something that will handle fuel and
> ignition on an 8
> cylinder up to ~14,000 rpm. I think 120lb/hr
> injectors will provide
> sufficient safety margins when running MeOH... Also
> need those injectors to
> idle nicely @ 1.5ms pw.
> 
> say, how much advance would a fairly oversquare
> engine running 14k rpm on
> methanol @ 5psi boost with relatively high static
> compression require
> anyway? Is there an upgrade for the Megasquirt
> planned that would support
> this application?
> 
> :-)
> -tom
> 
> 
>
_________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at
> http://mail.yahoo.com
> 
>
------------------------------------------------------------------------
----
> To unsubscribe from diy_efi, send "unsubscribe
> diy_efi" (without the quotes)
> in the body of a message (not the subject) to 
> majordomo at lists.diy-efi.org
> 


__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo!
Messenger. http://im.yahoo.com
------------------------------------------------------------------------
----
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes) in the body of a message (not the subject) to
majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org