interesting project, efi needed

[Bruce]

> > --- Tom <antiriced at yahoo.com> wrote:
> > > looking for an EFi system to run a project car I
> > > came across.. Ran some
> > > numbers and need something that will handle fuel and
> > > ignition on an 8
> > > cylinder up to ~14,000 rpm. I think 120lb/hr
> > > injectors will provide
> > > sufficient safety margins when running MeOH... Also
> > > need those injectors to
> > > idle nicely @ 1.5ms pw.

What do you consider idle?.
120/hr injector, at 1.5msec, is a ton of fuel for idle, unless your
inferring SEFI.
As a for instantance,  with 55s SEFI, on a warmed over GM, I'm running
around 2.8.  110s would be 1.4...
I don't know,  your cutting things close enough to get into giant headaches.
Might have to seriously study some raising rate FMUs to get this all to
work, or using 16 instead of 8 injectors.
Bruce

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org