interesting project, efi needed

Wed Sep 26 21:03:02 GMT 2001

This is a multi-part message in MIME format.

------=_NextPart_000_0266_01C14694.02CB8140
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Motec, or if you don't mind spending a little more, EFI Technology.
Bob Norwood is the guy to talk to about Motec products and crazy
street cars like your project there are his specialty. =20

---- Original Message ----
Date: Mon, 24 Sep 2001 23:10:37 -0400
From: "Tom" <antiriced at yahoo.com>
Subject: interesting project, efi needed=20

looking for an EFi system to run a project car I came across.. Ran some
numbers and need something that will handle fuel and ignition on an 8
cylinder up to ~14,000 rpm. I think 120lb/hr injectors will provide
sufficient safety margins when running MeOH... Also need those injectors =
to
idle nicely @ 1.5ms pw.

say, how much advance would a fairly oversquare engine running 14k rpm =
on
methanol @ 5psi boost with relatively high static compression require
anyway? Is there an upgrade for the Megasquirt planned that would =
support
this application?

:-)
- -tom

------=_NextPart_000_0266_01C14694.02CB8140
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4616.200" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Motec, or if you don't mind spending a =
little more,=20
EFI Technology.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Bob Norwood is the guy to talk to about =
Motec=20
products and crazy</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>street cars like your project there are =
his=20
specialty.&nbsp; </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>---- Original Message ----</FONT></DIV>
<DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" =
size=3D3>Date: Mon, 24=20
Sep 2001 23:10:37 -0400<BR>From: "Tom" &lt;</FONT><A=20
href=3D"mailto:antiriced at yahoo.com"><FONT face=3D"Times New Roman"=20
size=3D3>antiriced at yahoo.com</FONT></A><FONT face=3D"Times New Roman"=20
size=3D3>&gt;<BR>Subject: interesting project, efi needed =
<BR><BR>looking for an=20
EFi system to run a project car I came across.. Ran some<BR>numbers and =
need=20
something that will handle fuel and ignition on an 8<BR>cylinder up to =
~14,000=20
rpm. I think 120lb/hr injectors will provide<BR>sufficient safety =
margins when=20
running MeOH... Also need those injectors to<BR>idle nicely @ 1.5ms=20
pw.<BR><BR>say, how much advance would a fairly oversquare engine =
running 14k=20
rpm on<BR>methanol @ 5psi boost with relatively high static compression=20
require<BR>anyway? Is there an upgrade for the Megasquirt planned that =
would=20
support<BR>this application?<BR><BR>:-)<BR>-=20
-tom</FONT><BR></DIV></FONT></BODY></HTML>

------=_NextPart_000_0266_01C14694.02CB8140--

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org