ECU for 14k rpm V8

[Bruce]

*our* single stage diesel turbo runs right at 60 PSI, single stage, none
I/C'd.  The multi staged guys claim 250+
Bruce


From: "Eric Fahlgren" <efahl at adams.com>
Subject: Re: ECU for 14k rpm V8
> Tlsalt at aol.com wrote:
> >     The BMW turbo was an amazing motor, the highest specific output
engine
> >  The maximum boost pressure used was 5.6 bar (absolute), the dyno ran
out at
> How in the world did they get that kind of pressure ratio without
> sequential turbochargers?  I know for tractor guys this is low
> boost, but then they'll run 2, 3 or 4(!) sequential turbos, each
> adding a PR of 2.5-3.0...


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org