Oxygen sensors...

[rr]

Of course there is a lot of WB stuff there. It is all
stolen from this lists DIY-WB project.

See both this lists incoming and the www.diy-wb.org
sites for additional information. Also look for a pdf
that has either NTK or NGK in the filename. It is the
NTK/NGK WB sensor spec sheet.


BobR.



On Tue, 26 Mar 2002 17:51:09 -0800
 "les" <lesd at earthlink.net> wrote:
> Look here for wide band stuff.
> http://www.techedge.com.au/vehicle/wbo2/default.htm
> They ship fast, I'm in CA and got my order a just a few
> days.
> -Les
> 
> 
> > -----Original Message-----
> > From: owner-diy_efi at diy-efi.org 
> > [mailto:owner-diy_efi at diy-efi.org] On Behalf Of EFI
> Dude
> > Sent: Friday, March 22, 2002 10:28 AM
> > To: diy_efi at diy-efi.org
> > Subject: Oxygen sensors...
> > 
> > 
> > Hi,
> > 
> > I am trying to find information on the various types of
> 
> > oxygen sensors that are available, but haven't found
> much (so 
> > far) in the archives, though I'm sure that this
> discussion 
> > must've been beaten to death on this list.  Is there a
> quick 
> > link to a site that can give me some good info?  I'm
> still 
> > searching the archives though.
> > 
> > Initially, I'd like to know what output signal I can
> expect 
> > from my existing O2 sensors (1990 Mustang 5.0).  I know
> that 
> > it will be pulsed, but it that by design?  Or is it due
> to 
> > the firing of the cylinders?  By that I mean that if I
> placed 
> > the sensor in an enclosed container that has a gas with
> a 
> > certain a/f ratio, will I see a fixed output, or a
> pulsing output?
> > 
> > I'm also trying to find info on the different types of 
> > aftermarket wide-band sensors.  I've spoken with NTK
> who says 
> > that their wide bands are continuous voltage output
> with 
> > their controller boxes, but won't give me info on the
> O2 
> > sensor outputs by themselves.
> > 
> > I also heard that the Honda Insight (and possibly a
> Civic 
> > model) uses a wide-band sensor, but I haven't yet found
> out 
> > the specs on these.
> > 
> > Thanks,
> > -Neil.
> > 
> > 
> > 
> > 
> > 
> > ----- End of forwarded message from
> owner-diy_efi at diy-efi.org -----
> >
>
--------------------------------------------------------------
> > --------------
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi"
> 
> > (without the quotes) in the body of a message (not the 
> > subject) to majordomo at lists.diy-efi.org
> > 
> > 
> 
> ----- End of forwarded message from
> owner-diy_efi at diy-efi.org -----
>
----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi"
> (without the quotes)
> in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> 

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org