April 2002 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Apr 2 08:29:36 GMT 2002
Ending: Tue Apr 30 23:22:27 GMT 2002
Messages: 637

• Scanner   John Crouger
• kinetic viscosity of fuel in mm^2/s? or conversion from SSU to   Phil Lamovie
• Tuning with the DIY-WBs   Eric Fahlgren
• DIY WB Heater Ramp Up at low voltage   rr
• Sheilding on Diy-WB connector wires   Bruce
• DIY Traction Control   Bruce
• DIY Traction Control   md4etal
• DIY Traction Control   md4etal
• Tuning with the DIY-WBs   Jurgen Hartwig
• Sheilding on Diy-WB connector wires   Eck, Joel
• WBO2 questions   david.roland at gm.com
• references or books on GM TBI   Bryan Zublin
• Weatherpak terminals   Dave Pisciotta
• Sheilding on Diy-WB connector wires   Eck, Joel
• DIY WB Heater Ramp Up at low voltage   rr
• DIY Traction Control   md4etal
• Weatherpak terminals   Dave Pisciotta
• WBO2 questions   david.roland at gm.com
• references or books on GM TBI   Bryan Zublin
• Tuning with the DIY-WBs   Eric Fahlgren
• kinetic viscosity of fuel in mm^2/s? or conversion from SSU to   Phil Lamovie
• Sheilding on Diy-WB connector wires   Bruce
• Scanner   John Crouger
• DIY Traction Control   md4etal
• Tuning with the DIY-WBs   Jurgen Hartwig
• DIY Traction Control   Bruce
• programming for a MAF based system   Sean Olson
• Spare terminals for WB O2 connectors (was RE: Deadbeat WB-O2   Bryan Zublin
• UEGO   Interprep
• programming for a MAF based system   les
• Bosch MAF pin outs   les
• Wideband for sale..??   Kris Weldy
• DIY Traction Control   Steve Ravet
• Parts for DIY-WB LED display   Gary Browning
• DIY WB Heater Ramp Up at low voltage   bcroe at juno.com
• Sheilding on Diy-WB connector wires   bcroe at juno.com
• Parts for DIY-WB LED display   Xin
• Ethylene glycol & oxy sensors   Mike Poulson
• new Bosch Injectors   Perry Harrington
• programming for a MAF based system   Perry Harrington
• AW: Bosch MAF pin outs   Schaffer Klaus Maria
• Tuning with the DIY-WBs   Bruce
• new Bosch Injectors   Perry Harrington
• AW: Bosch MAF pin outs   Schaffer Klaus Maria
• Tuning with the DIY-WBs   Bruce
• Ethylene glycol & oxy sensors   Mike Poulson
• Sheilding on Diy-WB connector wires   bcroe at juno.com
• DIY WB Heater Ramp Up at low voltage   bcroe at juno.com
• Spare terminals for WB O2 connectors (was RE: Deadbeat WB-O2   Bryan Zublin
• Wideband for sale..??   Kris Weldy
• Parts for DIY-WB LED display   Gary Browning
• Parts for DIY-WB LED display   Xin
• programming for a MAF based system   Sean Olson
• DIY Traction Control   Steve Ravet
• Bosch MAF pin outs   les
• programming for a MAF based system   Perry Harrington
• programming for a MAF based system   les
• Oxygen sensors...   Bruce
• Oxygen sensors...   rr
• Bosch MAF pin outs   TVS
• Is this too simple?   Jeremy Harris
• Oxygen sensors...   Ron Schroeder
• sei   Alexander Hemery
• Deadbeat WB-O2 connector purchasers   Kris Sundell
• WB02 parts kits   Chris Abreu
• OBD II Pinout   bob
• MAP sensor   Steve Spiers
• Bosch MAF pin outs   Perry Harrington
• Bosch MAF pin outs   Romeo Papa
• Propane/water/alcohol injection and O2 sensors   Geddes, Brian J
• Injector information please?   The Holling's
• Low impedence EEC-IV modification   Justin Becker
• WB02 parts kits   Chris Abreu
• Bosch MAF pin outs   TVS
• Oxygen sensors...   Ron Schroeder
• MAP sensor   Steve Spiers
• Is this too simple?   Jeremy Harris
• Bosch MAF pin outs   Perry Harrington
• Deadbeat WB-O2 connector purchasers   Kris Sundell
• Propane/water/alcohol injection and O2 sensors   Geddes, Brian J
• Oxygen sensors...   Bruce
• Oxygen sensors...   rr
• Bosch MAF pin outs   Romeo Papa
• Low impedence EEC-IV modification   Justin Becker
• OBD II Pinout   bob
• LS1 install guide   don.broadus at exeloncorp.com
• Sheilding on Diy-WB connector wires   rr
• WBO2 questions   Barry Tisdale
• DIY Traction Control   Ron Schroeder
• WBO2 thoughts   Shannen Durphey
• Is this too simple?   Jeremy Harris
• WBO2 questions   bcroe at juno.com
• Have Tweecer, Need WBo2 DIY Kit   GT40MkI at aol.com
• DIY Traction Control   md4etal
• Tuning with the DIY-WBs   rr
• WBO2 questions   rr
• No Subject   Terry Frankcombe
• Bosch MAF pin outs   Phil Hunter
• help newbie :o)   Alexander Hemery
• WBO2 questions   Barry Tisdale
• WBO2 thoughts   Shannen Durphey
• WBO2 questions   bcroe at juno.com
• DIY Traction Control   md4etal
• Tuning with the DIY-WBs   rr
• Sheilding on Diy-WB connector wires   rr
• LS1 install guide   don.broadus at exeloncorp.com
• DIY Traction Control   Ron Schroeder
• Bosch MAF pin outs   Phil Hunter
• Is this too simple?   Jeremy Harris
• No Subject   Terry Frankcombe
• WBO2 questions   rr
• help newbie :o)   Alexander Hemery
• Have Tweecer, Need WBo2 DIY Kit   GT40MkI at aol.com
• normalizing WB output voltage   rob files
• Parts kit   eric a. duncan
• Here's Some LED Display Pics....   TROYXTROY
• Another pic of my DIY-WB Display   TROYXTROY
• Pic of DIY-WB   TROYXTROY
• NOW OT Texas: RE: Wideband for sale..??   Chris Happel
• Ethylene glycol & oxy sensors   Chris Happel
• Parts for DIY-WB LED display   Chris Happel
• UEGO   rr
• WB LED Display...   TROYXTROY
• Parts for DIY-WB LED display   bcroe at juno.com
• Spare terminals for WB O2 connectors (was RE: Deadbeat WB-O2 connector purchasers)   Paul Messinger
• Injector information please?   Perry Harrington
• Oxygen sensors...   Brian Dessent
• Propane/water/alcohol injection and O2 sensors   marko.cosic
• Hi I'm new to the list!   Michael Duquette
• WB02 parts kits   Keith
• Propane/water/alcohol injection and O2 sensors   Greg Hermann
• Propane/water/alcohol injection and O2 sensors   Garfield Willis
• Bosch MAF pin outs   les
• Is BP Sensor needed in MAF system???   Ron Boley
• question about passkey   mike beebe
• MAP sensor   Peter Pinto
• Ethylene glycol & oxy sensors   Chris Happel
• Here's Some LED Display Pics....   TROYXTROY
• Injector information please?   Perry Harrington
• UEGO   rr
• WB LED Display...   TROYXTROY
• normalizing WB output voltage   rob files
• Oxygen sensors...   Brian Dessent
• Parts for DIY-WB LED display   bcroe at juno.com
• NOW OT Texas: RE: Wideband for sale..??   Chris Happel
• Another pic of my DIY-WB Display   TROYXTROY
• Parts kit   eric a. duncan
• Parts for DIY-WB LED display   Chris Happel
• Spare terminals for WB O2 connectors (was RE: Deadbeat WB-O2 connector purchasers)   Paul Messinger
• Propane/water/alcohol injection and O2 sensors   Garfield Willis
• Propane/water/alcohol injection and O2 sensors   marko.cosic
• Is BP Sensor needed in MAF system???   Ron Boley
• MAP sensor   Peter Pinto
• Pic of DIY-WB   TROYXTROY
• Bosch MAF pin outs   les
• question about passkey   mike beebe
• Hi I'm new to the list!   Michael Duquette
• Propane/water/alcohol injection and O2 sensors   Greg Hermann
• WB02 parts kits   Keith
• Need some help to make my DIY-WB pass the tests   renaud
• WB O2 sensor Sumitomo connectors - update   Bryan Zublin
• MAP sensor   Steve Ravet
• Wideband for sale..??   huw scourfield
• programming for a MAF based system   Bruce
• WBO2 thoughts   The Punisher
• Is BP Sensor needed in MAF system???   Perry Harrington
• Wideband for sale..??   huw scourfield
• WB O2 sensor Sumitomo connectors - update   Bryan Zublin
• MAP sensor   Steve Ravet
• Need some help to make my DIY-WB pass the tests   renaud
• programming for a MAF based system   Bruce
• WBO2 thoughts   The Punisher
• Is BP Sensor needed in MAF system???   Perry Harrington
• BDE Limited   Chris McKinnon
• BDE Limited   Chris McKinnon
• Replacing OE AFM unit   goonie.gordon at talk21.com
• Replacing OE AFM unit   goonie.gordon at talk21.com
• Building a stimulator   Wayne Macdonald
• Is BP Sensor needed in MAF system???   Carter Shore
• Building a stimulator   Wayne Macdonald
• Is BP Sensor needed in MAF system???   Carter Shore
• AW: Building a stimulator   Rausch, Bernd
• Building a stimulator   Richard M
• AW: Building a stimulator   Rausch, Bernd
• Building a stimulator   Richard M
• Is this too simple?   Eric Fahlgren
• Flap to film   Bernd Felsche
• Building a stimulator   goonie.gordon at talk21.com
• Flap to film   bill.shurvinton at nokia.com
• Is this too simple?   Eric Fahlgren
• Flap to film   Bernd Felsche
• Building a stimulator   goonie.gordon at talk21.com
• Flap to film   bill.shurvinton at nokia.com
• Building a stimulator   Bevan Weiss
• Building a stimulator   Bevan Weiss
• question about passkey   van setten, tim at ACSSD
• Flap to film   Bernd Felsche
• question about passkey   van setten, tim at ACSSD
• Propane/water/alcohol injection and O2 sensors   Eck, Joel
• Flap to film   bill.shurvinton at nokia.com
• Building a stimulator   goonie.gordon at talk21.com
• Flap to film   Bernd Felsche
• Building a stimulator   goonie.gordon at talk21.com
• Flap to film   bill.shurvinton at nokia.com
• Propane/water/alcohol injection and O2 sensors   Eck, Joel
• Propane/water/alcohol injection and O2 sensors   Garfield Willis
• Propane/water/alcohol injection and O2 sensors   Garfield Willis
• Shielding on Diy-WB connector wires   Hugh Keir
• Propane/water/alcohol injection and O2 sensors   Axel Rietschin
• Shielding on Diy-WB connector wires   Hugh Keir
• Propane/water/alcohol injection and O2 sensors   Axel Rietschin
• Propane/water/alcohol injection and O2 sensors   Greg Hermann
• Propane/water/alcohol injection and O2 sensors   Geddes, Brian J
• Propane/water/alcohol injection and O2 sensors   Greg Hermann
• Propane/water/alcohol injection and O2 sensors   Geddes, Brian J
• Anyone over order on their WBO2 connector purchase?   Gary Browning
• Anyone over order on their WBO2 connector purchase?   Gary Browning
• Propane/water/alcohol injection and O2 sensors   William Shurvinton
• Propane/water/alcohol injection and O2 sensors   William Shurvinton
• Propane/water/alcohol injection and O2 sensors   William Shurvinton
• Propane/water/alcohol injection and O2 sensors   William Shurvinton
• Propane/water/alcohol injection and O2 sensors   Axel Rietschin
• Propane/water/alcohol injection and O2 sensors   Axel Rietschin
• normalizing WB output voltage   Gary Browning
• normalizing WB output voltage   Gary Browning
• Propane/water/alcohol injection and O2 sensors   Bruce
• Building a stimulator   Wayne Macdonald
• Propane/water/alcohol injection and O2 sensors   Bruce
• normalizing WB output voltage   Garfield Willis
• Building a stimulator   Wayne Macdonald
• fuel pressure sensor   Kelley, Damon
• normalizing WB output voltage   Garfield Willis
• fuel pressure sensor   Kelley, Damon
• Propane/water/alcohol injection and O2 sensors   Garfield Willis
• Propane/water/alcohol injection and O2 sensors   Garfield Willis
• Shielding on Diy-WB connector wires   rr
• Shielding on Diy-WB connector wires   rr
• Propane/water/alcohol injection and O2 sensors   Geddes, Brian J
• Propane/water/alcohol injection and O2 sensors   Geddes, Brian J
• Propane/water/alcohol injection and O2 sensors   Garfield Willis
• Propane/water/alcohol injection and O2 sensors   Garfield Willis
• WB won't read Methanol   Richard Wakeling
• WB won't read Methanol   Richard Wakeling
• WB won't read Methanol   Garfield Willis
• normalizing WB output voltage   Rob F
• normalizing WB output voltage   Rob F
• WB won't read Methanol   Garfield Willis
• WB won't read Methanol   Richard Wakeling
• WB won't read Methanol   Richard Wakeling
• Propane/water/alcohol injection and O2 sensors   Phil Lamovie
• Propane/water/alcohol injection and O2 sensors   Phil Lamovie
• Propane/water/alcohol injection and O2 sensors   bill.shurvinton at nokia.com
• MAP sensor   Steve Spiers
• Propane/water/alcohol injection and O2 sensors   bill.shurvinton at nokia.com
• MAP sensor   Steve Spiers
• Propane/water/alcohol injection and O2 sensors   Eric Fahlgren
• Propane/water/alcohol injection and O2 sensors   Eric Fahlgren
• Propane/water/alcohol injection and O2 sensors   bill.shurvinton at nokia.com
• Propane/water/alcohol injection and O2 sensors   bill.shurvinton at nokia.com
• [Fwd: RE: Propane/water/alcohol injection and O2 sensors]   Phil Lamovie
• MAP sensor   Eck, Joel
• [Fwd: RE: Propane/water/alcohol injection and O2 sensors]   Phil Lamovie
• add 8-10° of advance with LPG   Phil Lamovie
• [Fwd: RE: Propane/water/alcohol injection and O2 sensors]   bill.shurvinton at nokia.com
• MAP sensor   Eck, Joel
• add 8-10° of advance with LPG   Phil Lamovie
• Miller Cycle assistance   Stephen Andersen
• [Fwd: RE: Propane/water/alcohol injection and O2 sensors]   bill.shurvinton at nokia.com
• MAP sensor   steve ravet
• Miller Cycle assistance   Stephen Andersen
• MAP sensor   steve ravet
• WBO2 Connector group buy overpurchase?   Stephen Andersen
• WBO2 Connector group buy overpurchase?   Stephen Andersen
• MAP sensor   george00
• MAP sensor   george00
• Propane/water/alcohol injection and O2 sensors   Perry Harrington
• WB02 parts kits   Gregory A. Parmer
• Trying to learn about my Bosch Motronic   bforster at att.net
• Propane/water/alcohol injection and O2 sensors   William Shurvinton
• Propane/water/alcohol injection and O2 sensors   Clint Corbin
• Propane/water/alcohol injection and O2 sensors   Perry Harrington
• What is Super Jet/Jet Hot?   Tony Bryant
• What is Super Jet/Jet Hot?   Jon Davis
• Propane/water/alcohol injection and O2 sensors   Garfield Willis
• Trying to learn about my Bosch Motronic   Stephen Andersen
• What is Super Jet/Jet Hot?   Garfield Willis
• MAP sensor   arnie
• Propane/water/alcohol injection and O2 sensors   bill.shurvinton at nokia.com
• Toyota MAP sensor   Steve Spiers
• MAP sensor   Steve Spiers
• How to test 5-wire O2 sensor?   alain at fbsims.com
• 5-wire O2 Sensor Sources   van setten, tim at ACSSD
• Propane/water/alcohol injection and O2 sensors   Barry Tisdale
• 5-wire O2 Sensor Sources   Gregory A. Parmer
• 5-wire O2 Sensor Sources   bill.shurvinton at nokia.com
• Propane/water/alcohol injection and O2 sensors   bill.shurvinton at nokia.com
• 5-wire O2 Sensor Sources   Jurgen Hartwig
• 5-wire O2 Sensor Sources   Hugh Keir
• 5-wire O2 Sensor Sources   ECMnut at aol.com
• 5-wire O2 Sensor Sources   van setten, tim at ACSSD
• 5-wire O2 Sensor Sources   rr
• 5-wire O2 Sensor Sources   bill.shurvinton at nokia.com
• 5-wire O2 Sensor Sources   WEG1192 at aol.com
• 730 ECM ALDL scan tool (beerware) available   Carsten Meyer
• 5-wire O2 Sensor Sources   Garfield Willis
• MAP sensor   Eck, Joel
• Interesting   Raymond Brantley
• What is Super Jet/Jet Hot?   Garfield Willis
• MAP sensor (Cheap 3-bar!)   rob files
• 730 ECM ALDL scan tool ZIP was garbled - fixed!   Carsten Meyer
• 5-wire O2 Sensor Sources   Shannen at grolen.com
• 5-wire O2 Sensor Sources   Shannen at grolen.com
• 5-wire O2 Sensor Sources   les
• 5-wire O2 Sensor Sources   William Shurvinton
• Ethylene glycol & oxy sensors   Chris Wilson
• 5-wire O2 Sensor Sources   Garfield Willis
• 5-wire O2 Sensor Sources   Garfield Willis
• [Fwd: RE: Propane/water/alcohol injection and O2 sensors]   Greg Hermann
• Propane/water/alcohol injection and O2 sensors   Greg Hermann
• 5-wire O2 Sensor Sources   Frank F Parker
• 5-wire O2 Sensor Sources   Shannen Durphey
• Who wouldn't use a 5-wire O2 Sensor?   Shannen Durphey
• 5-wire O2 Sensor Sources   Garfield Willis
• Propane/water/alcohol injection and O2 sensors   Greg Hermann
• DIY_EFI Digest V6 #89   Clare Snyder
• Propane/water/alcohol injection and O2 sensors   Garfield Willis
• Who wouldn't use a 5-wire O2 Sensor?   Garfield Willis
• MAP sensor (Cheap 3-bar!)   Steve Spiers
• Propane & Le mans   bill.shurvinton at nokia.com
• Who wouldn't use a 5-wire O2 Sensor?   bill.shurvinton at nokia.com
• Who wouldn't use a 5-wire O2 Sensor?   Bruce
• new to list   jer
• new to list   efi_student
• Bosch c/l advance   Frank F Parker
• WB testing problems   Stephen Andersen
• NOW OT Texas: RE: Wideband for sale..??   Kevin Wright (home)
• WB testing problems   bcroe at juno.com
• Bosch c/l advance   Garfield Willis
• MAP sensor problems   Steve Spiers
• Need some help to make my DIY-WB pass the tests   bcroe at juno.com
• Propane/water/alcohol injection and O2 sensors   Phil
• Bosch c/l advance   William Shurvinton
• WB O2 sensor Sumitomo connectors - recieved   Doug Dayson
• WB testing problems   Stephen Andersen
• WB testing problems   rr
• Bosch c/l advance   Frank F Parker
• Bosch c/l advance   Frank F Parker
• WB testing problems   Stephen Andersen
• Parts for DIY-WB LED display   Rod Hiorns
• WB testing problems   bcroe at juno.com
• Bosch c/l advance   William Shurvinton
• Parts for DIY-WB LED display   elcamino73
• [Diy-efi] injector identification   Kris Sundell
• [Diy-efi] Traction Control System - In progress (Update 1)   Crescent Kao
• [Diy-efi] Traction Control System - In progress (Update 1)   Brian Sidebotham
• [Diy-efi] Traction Control System - In progress (Update 1)   md4etal
• [Diy-efi] A little oldie: ION question   Tomas Sokorai Sch.
• [Diy-efi] Traction Control System - In progress (Update 1)   Tom Sharpe
• [Diy-efi] list name mistake   Jon V
• [Diy-efi] list name mistake   Jon V
• [Diy-efi] list name mistake   Raymond Brantley
• [Diy-efi] list name mistake   Jim Fitzgerald
• Fwd: [Diy_efi] L Jetronic Question   Allen Mitchell
• [Diy-efi] test   Jon V
• [Diy-efi] Re: test   Gerhard Mueller
• [Diy-efi] Re: test   Garfield Willis
• [Diy-efi] A little oldie: ION question   Phil Lamovie
• [Diy_efi] motronic 2.5   Brian Sidebotham
• [Diy_efi] I think this is working, and admin note   Jon V
• [Diy_efi] I think this is working, and admin note   Garfield Willis
• [Diy_efi] FW: WB testing problems - again   Stephen Andersen
• [Diy_efi] I think this is working, and admin note   users
• [Diy_efi] I think this is working, and admin note   Garfield Willis
• [Diy_efi] I think this is working, and admin note   marko.cosic
• [Diy_efi] I think this is working, and admin note   marko.cosic
• [Diy_efi] FW: WB testing problems - again   rr
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress (Update 1)   Rodney Fulk
• [Diy_efi] L-Jetronic   bcroe at juno.com
• [Diy_efi] L-Jetronic   Allen Mitchell
• [Diy_efi] WB testing problems   bcroe at juno.com
• [Diy_efi] BOSCH 15725 O2 Sensor   944Technologist
• [Diy_efi] Injector identification   Kris Sundell
• [Diy_efi] Re: FW: WB testing problems - again   Phil Hunter
• [Diy_efi] L Jetronic Question   Con Torrisi
• [Diy_efi] Estimation of spark advance   Carsten Beth
• [Diy_efi] Estimation of spark advance   Perry Harrington
• [Diy_efi] Estimation of spark advance   Bruce
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress   Lasse Langwadt Christensen
• [Diy_efi] Hello...   Garrett Herning
• [Diy_efi] Estimation of spark advance   Bruce
• [Diy_efi] V2.00 Megasquirt Schematics and Layout   Bruce Bowling
• [Diy_efi] Estimation of spark advance   Carsten Beth
• [Diy_efi] [Diy_efi]: prop sensing   William Shurvinton
• [Diy_efi] Estimation of spark advance   William Shurvinton
• [Diy_efi] Estimation of spark advance   Bruce
• [Diy_efi] Estimation of spark advance   Bruce
• [Diy_efi] Re: FW: WB testing problems - again   Stephen Andersen
• [Diy_efi] [Diy_efi]: prop sensing   Stephen Andersen
• [Diy_efi] what are these? can anyone identify the mfr?   ptegler at cablespeed
• [Diy_efi] Fuel pickup   Barry Tisdale
• [Diy_efi] Fuel pickup   Bruce
• [Diy_efi] Fuel pickup   Greg Hermann
• [Diy_efi] prop sensing   bcroe at juno.com
• [Diy_efi] Fuel pickup   marko.cosic
• [Diy_efi] [Diy_efi]: prop sensing   bill.shurvinton at nokia.com
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress (Update 1)   Brian Sidebotham
• [Diy_efi] [Diy_efi]: prop sensing   Rich M
• [Diy_efi] Fuel pickup   elcamino73
• [Diy_efi] Fuel pickup   Barry Tisdale
• [Diy_efi] [Diy_efi]: prop sensing   Greg Hermann
• [Diy_efi] [Diy_efi]: prop sensing   bill.shurvinton at nokia.com
• [Diy_efi] [Diy_efi]: prop sensing   Tom Sharpe
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress (Update 1)   Bruce
• [Diy_efi] Fuel pickup   Bruce
• [Diy_efi] Fuel pickup   Bruce
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress (Update 1)   Crescent Kao
• [Diy_efi] WB02 Circuit description and theory??   rob files
• [Diy_efi] Fuel pickup   marko.cosic
• [Diy_efi] Fuel pickup   Nic van der Walt
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress (Update 1)   Nic van der Walt
• [Diy_efi] WB testing problems MORE!!!   Stephen Andersen
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress (Update 1)   Rodney Fulk
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress (Update 1)   Bruce
• [Diy_efi] WB testing problems MORE!!!   bcroe at juno.com
• [Diy_efi] WB testing problems MORE!!!   bill.shurvinton at nokia.com
• [Diy_efi] WB testing problems MORE!!!   Stephen Andersen
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress (Update 1)   Tom Sharpe
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress (Update 1)   Brian Sidebotham
• [Diy_efi] WB testing problems MORE!!!   rob files
• [Diy_efi] FI Gas Tank   don.broadus at exeloncorp.com
• [Diy_efi] FI Gas Tank   joe graham
• [Diy_efi] WB testing problems MORE!!!   William Shurvinton
• [Diy_efi] FI Gas Tank   Shannen Durphey
• [Diy_efi] WB testing problems MORE!!!   Stephen Andersen
• [Diy_efi] WB testing problems   Enzo
• [Diy_efi] WB testing Problems   Enzo Iadevaia
• [Diy_efi] WB testing problems MORE!!!   bill.shurvinton at nokia.com
• [Diy_efi] WB stability   Santi Udomkesmalee
• [Diy_efi] FI Gas Tank   joe graham
• [Diy_efi] FI Gas Tank   rr
• [Diy_efi] Converting LH system to work w/ MAP sensor   Kenny
• [Diy_efi] Converting LH system to work w/ MAP sensor   Kenny
• [Diy_efi] Correction WB 22 Mar LED Display PC Parts   bcroe at juno.com
• [Diy_efi] radar guns   steve ravet
• [Diy_efi] Converting LH system to work w/ MAP sensor   Shannen Durphey
• [Diy_efi] DIY-EFI group buy second run   Steven Ciciora
• [Diy_efi] Converting LH system to work w/ MAP sensor   Chris Conlon
• [Diy_efi] DIY-EFI group buy second run   Fran and Bud
• [Diy_efi] Test   alain at fbsims.com
• [Diy_efi] Need help with diy-wb, Vout = 2.48v in free air   alain at fbsims.com
• [Diy_efi] Test   Kevin Wright (work)
• [Diy_efi] DIY-EFI group buy second run   Programmer
• [Diy_efi] Need help with diy-wb, Vout = 2.48v in free air   Brian
• [Diy_efi] Bosch MAF yet again....   TVS
• [Diy_efi] Need help with diy-wb, Vout = 2.48v   Shannen at grolen.com
• [Diy_efi] Need help with diy-wb, Vout = 2.48v in free air   alain at fbsims.com
• [Diy_efi] Bosch MAF yet again....   Perry Harrington
• [Diy_efi] DIY-EFI group buy second run   Kris Weldy
• [Diy_efi] DIY-EFI group buy second run   David C. Young
• [Diy_efi] DIY-EFI group buy second run   Kenny
• [Diy_efi] DIY-EFI group buy second run   Steve B Wilson/AssetSltns/Systems/HSAS/MAXIMUS
• [Diy_efi] DIY-EFI group buy second run   Jurgen Hartwig
• [Diy_efi] DIY-EFI group buy second run   Kenny
• [Diy_efi] WB stability   rr
• [Diy_efi] WB testing problems   rr
• [Diy_efi] Bosch MAF yet again....   TVS
• [Diy_efi] LSM-11   McLeod, John
• [Diy_efi] Need help, Vout = 2.48 with sensor in free air   alain at fbsims.com
• [Diy_efi] LSM11   McLeod, John
• [Diy_efi] LSM-11   Peter Gargano
• [Diy_efi] Why do some EFI systems use a cold start injector?   Chris Wilson
• [Diy_efi] Why do some EFI systems use a cold start injector?   Perry Harrington
• [Diy_efi] Why do some EFI systems use a cold start injector?   Jeff Meager
• [Diy_efi] Effect of detonation on measured mixture?   Shawn Fogg
• [Diy_efi] radar guns   bcroe at juno.com
• [Diy_efi] Traction Control System (update 2)   Crescent Kao
• [Diy_efi] Traction Control System (update 2)   Lachlan Chapman
• [Diy_efi] Why do some EFI systems use a cold start injector?   Axel Rietschin
• [Diy_efi] Why do some EFI systems use a cold start injector?   Shannen Durphey
• [Diy_efi] Traction Control System (update 2)   Shannen Durphey
• [Diy_efi] Traction Control System (update 2)   Shannen Durphey
• [Diy_efi] Traction Control System (update 2)   Axel Rietschin
• [Diy_efi] Traction Control System (update 2)   Perry Harrington
• [Diy_efi] Need help with diy-wb, Vout = 2.48v   Brian
• [Diy_efi] Traction Control System (update 2)   Crescent Kao
• [Diy_efi] Need help with diy-wb, Vout = 2.48v   Stephen Andersen
• [Diy_efi] Traction Control System (update 2)   Perry Harrington
• [Diy_efi] RE: [Diy-efi] Traction Control System - In progress (Update 1)   Jon Davis
• [Diy_efi] DIY-EFI group buy second run   JMSMAUTOMOTIVE at cs.com
• [Diy_efi] Need help with diy-wb, Vout = 2.48v   Brian
• [Diy_efi] PC Board for WB02 36 LED bar graph display   bcroe at juno.com
• [Diy_efi] Traction Control System (update 2)   Brian Sidebotham
• [Diy_efi] bmw 325 eprom   Jonathan Norman
• [Diy_efi] radar guns   Programmer
• [Diy_efi] Bosch MAF yet again....   huw scourfield
• [Diy_efi] Bosch MAF yet again....   TVS
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] Fiat digital dashboard   Smir
• [Diy_efi] Effect of detonation on measured mixture?   Shawn Fogg
• [Diy_efi] Differences between the LH versions?   Kenny
• [Diy_efi] O2 sensor sensitivy speed   Henning Baldersheim
• [Diy_efi] Bosch MAF yet again....   Sean Olson
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] O2 sensor sensitivy speed   Bruce
• [Diy_efi] Effect of detonation on measured mixture?   Shawn Fogg
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] Effect of detonation on measured mixture?   Shawn Fogg
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] Effect of detonation on measured mixture?   Stephen Andersen
• [Diy_efi] Effect of detonation on measured mixture?   Perry Harrington
• [Diy_efi] O2 sensor sensitivy speed   Henning Baldersheim
• [Diy_efi] Effect of detonation on measured mixture?   J. Creech
• [Diy_efi] CNP source (was Effect of detonation on measured mixture?)   Marc Reviel
• [Diy_efi] Effect of detonation on measured mixture?   Shawn Fogg
• [Diy_efi] O2 sensor sensitivy speed   Kenny
• [Diy_efi] Why do some EFI systems use a cold start injector?   Chris Wilson
• [Diy_efi] Re: CNP source   J. Creech
• [Diy_efi] O2 sensor sensitivy speed   Bruce
• [Diy_efi] Re: CNP source   Marc Reviel
• [Diy_efi] Re: CNP source   Kenny Bauman
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] O2 sensor sensitivy speed   Kenny
• [Diy_efi] O2 sensor sensitivy speed   Bruce
• [Diy_efi] GM ECM 1227808 VN Commodore   aclough at paradise.net.nz
• [Diy_efi] Re: CNP source   Perry Harrington
• [Diy_efi] GM ECM 1227808 VN Commodore   Bruce
• [Diy_efi] O2 sensor sensitivy speed   Shannen Durphey
• [Diy_efi] Effect of detonation on measured mixture?   Shannen Durphey
• [Diy_efi] PC Board for WB02 36 LED bar graph display   JMSMAUTOMOTIVE at cs.com
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] Why do some EFI systems use a cold start injector?   Shannen Durphey
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] O2 sensor sensitivy speed   Shannen Durphey
• [Diy_efi] Effect of detonation on measured mixture?   Stephen Andersen
• [Diy_efi] Re: CNP source   Shannen Durphey
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] O2 sensor sensitivy speed   Henning Baldersheim
• [Diy_efi] Effect of detonation on measured mixture?   Shawn Fogg
• [Diy_efi] ION sensing coils   Henning Baldersheim
• [Diy_efi] Effect of detonation on measured mixture?   Shannen Durphey
• [Diy_efi] O2 sensor sensitivy speed   Shannen Durphey
• [Diy_efi] Effect of detonation on measured mixture?   Shawn Fogg
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] Effect of detonation on measured mixture?   Shawn Fogg
• [Diy_efi] Effect of detonation on measured mixture?   Shannen Durphey
• [Diy_efi] WB O2 connectors.   Clare Snyder
• [Diy_efi] Re: CNP source   Kenny Bauman
• [Diy_efi] Re: CNP source   Kenny Bauman
• [Diy_efi] Re: Where the archived things are...   Shannen Durphey
• [Diy_efi] Re: Where the archived things are...   Lasse Langwadt Christensen
• [Diy_efi] Re: CNP source   Scot Sealander
• [Diy_efi] O2 sensor sensitivy speed   Andrew Theurer
• [Diy_efi] Effect of detonation on measured mixture?   William Shurvinton
• [Diy_efi] LS1   William Shurvinton
• [Diy_efi] Effect of detonation on measured mixture?   William Shurvinton
• [Diy_efi] Traction Control System (update 2)   Crescent Kao
• [Diy_efi] Traction Control System (update 2)   Bevan Weiss
• [Diy_efi] Traction Control System (update 2)   Garrett Herning
• [Diy_efi] Traction Control System (update 2)   Brian Dessent
• [Diy_efi] Bosch MAF yet again....   TVS
• [Diy_efi] Traction Control System (update 2)   Nic van der Walt
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] Effect of detonation on measured mixture?   les
• [Diy_efi] Bosch MAF yet again....   les
• [Diy_efi] Effect of detonation on measured mixture?   William Shurvinton
• [Diy_efi] Effect of detonation on measured mixture?   William Shurvinton
• [Diy_efi] Traction Control System (update 2)   Perry Harrington
• [Diy_efi] LS1   Perry Harrington
• [Diy_efi] Traction Control System (update 2)   Bruce
• [Diy_efi] Effect of detonation on measured mixture?   Bruce
• [Diy_efi] Effect of detonation on measured mixture?   David C. Young
• [Diy_efi] LS1   bernadot
• [Diy_efi] LS1   William Shurvinton
• [Diy_efi] Effect of detonation on measured mixture?   William Shurvinton
• [Diy_efi] Traction Control System (update 2)   Axel Rietschin
• [Diy_efi] Re: Bruce -- Question on your *volt blaster*   ROBO5.8
• [Diy_efi] WB Integrator testing   William Shurvinton
• [Diy_efi] Why do some EFI systems use a cold start injector?   Mos
• [Diy_efi] Archives   Adam Clough
• [Diy_efi] Archives   Steve
• [Diy_efi] Archives   Adam Clough
• [Diy_efi] LS1   Lachlan Chapman
• [Diy_efi] LS1   bill.shurvinton at nokia.com
• [Diy_efi] Traction Control System (update 2)   Jorgen Karlsson
• [Diy_efi] Archives   steve ravet
• [Diy_efi] Traction Control System (update 2)   Nic van der Walt
• [Diy_efi] WB O2 connectors.   steve ravet
• [Diy_efi] Traction Control System (update 2)   les
• [Diy_efi] Traction Control System (update 2)   Bruce
• [Diy_efi] Traction Control System (update 2)   Kenny
• [Diy_efi] Traction Control System (update 2)   Tomas Sokorai Sch.
• [Diy_efi] Traction Control System (update 2)   Bruce
• [Diy_efi] Traction Control System (update 2)   Bruce
• [Diy_efi] Traction Control System (update 2)   Kenny
• [Diy_efi] Traction Control System (update 2)   Bruce
• [Diy_efi] Traction Control System (update 2)   Barry Tisdale
• [Diy_efi] Traction control strategy (solution offered)   Perry Harrington
• [Diy_efi] test   Mike Diehl
• [Diy_efi] Traction Control System (update 2)   Jörgen Karlsson
• [Diy_efi] Traction Control System (update 2)   Jorgen Karlsson
• [Diy_efi] Traction control strategy (solution offered)   Crescent Kao
• [Diy_efi] Traction Control System (update 2)   Axel Rietschin
• [Diy_efi] Traction control strategy (solution offered)   Axel Rietschin
• [Diy_efi] Traction control strategy (solution offered)   Axel Rietschin
• [Diy_efi] Traction control strategy (solution offered)   bill.shurvinton at nokia.com
• [Diy_efi] Traction control strategy (solution offered)   Mike Diehl
• [Diy_efi] Traction control strategy (solution offered)   Nic van der Walt
• [Diy_efi] Traction control strategy (solution offered)   Crescent Kao
• [Diy_efi] Traction control strategy (solution offered)   bill.shurvinton at nokia.com
• [Diy_efi] Traction control strategy (solution offered)   Crescent Kao
• [Diy_efi] Traction control strategy (solution offered)   Nic van der Walt
• [Diy_efi] Traction control strategy (solution offered)   bill.shurvinton at nokia.com
• [Diy_efi] Traction control strategy (solution offered)   Crescent Kao
• [Diy_efi] Calibrating Hot-wire MAF sensors   Grant Beaty
• [Diy_efi] Traction control strategy (solution offered)   Brian Dessent
• [Diy_efi] Traction control strategy (solution offered)   Crescent Kao
• [Diy_efi] Traction control strategy (solution offered)   Axel Rietschin
• [Diy_efi] Traction control strategy (solution offered)   Axel Rietschin
• [Diy_efi] Traction control strategy (solution offered)   bill.shurvinton at nokia.com
• [Diy_efi] Traction control strategy (solution offered)   bill.shurvinton at nokia.com
• [Diy_efi] Traction control strategy (solution offered)   Axel Rietschin
• [Diy_efi] Traction control strategy (solution offered)   Axel Rietschin
• [Diy_efi] Traction control strategy (solution offered)   bill.shurvinton at nokia.com
• [Diy_efi] Traction control strategy (solution offered)   bill.shurvinton at nokia.com
• [Diy_efi] Traction control strategy (solution offered)   Perry Harrington
• [Diy_efi] Traction control strategy (solution offered)   steve ravet
• [Diy_efi] Traction control strategy (possibly OT)   Conrad
• [Diy_efi] Traction control strategy (solution offered)   Crescent Kao
• [Diy_efi] Traction control strategy (solution offered)   Conrad
• [Diy_efi] Traction control strategy (solution offered)   Nic van der Walt
• [Diy_efi] Traction control strategy (solution offered)   marko.cosic
• [Diy_efi] Traction control strategy (solution offered)   Bruce
• [Diy_efi] Traction control strategy (solution offered)   William Shurvinton
• [Diy_efi] Traction control strategy (solution offered)   William Shurvinton
• [Diy_efi] Traction control strategy (solution offered)   md4etal
• [Diy_efi] Traction control strategy (solution offered)   Perry Harrington

Last message date: Tue Apr 30 23:22:27 GMT 2002
Archived on: Thu May 30 06:00:54 GMT 2013

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...