[Diy_efi] Converting LH system to work w/ MAP sensor

[Chris Conlon]

At 06:58 PM 4/24/02 -0400, Shannen Durphey wrote:

I am selling a system which does this, and a whole lot more.
The maps are all in eeprom, so if the Ve curve changes you
can easily re-map to compensate. It replaces a VPC + S-AFC +
ITC + boost controller, and has resolution and map sizes
equal to or better than most any EMS.

http://www.speakeasy.org/~synchris/eliza/eliza-lite.html

   Chris C.


>Problem with that unit is when the curve in the box doesn't match the
>car, you're stuck with what ya got.
>
>Shannen
>
>Kenny wrote:
>> 
>> Hey all,
>> De-lurking to ask something that's been rolling around
>> in my head for a couple weeks.
>> How feasible would it be to fit a MAP sensor to the
>> manifold of a turbo car- and then monitor its output
>> voltage as well as that of the existing AMM. Then,
>> construct a rather large table listing the AMM outut
>> voltage as well as the MAP's output voltage at say 256


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi