MAP sensor

[Steve Spiers]

Hi, interesting site. The part number there is totally different. Is it the same 3
bar GM sensor as listed in the GM_ECM page? has anyone elce purchased one of
these?

Steve

"Eck, Joel" wrote:

> try looking here : www.hondata.com/3barinstall.html
>
> -----Original Message-----
> From: Steve Spiers [mailto:s.spiers at xtra.co.nz]
> Sent: Wednesday, April 10, 2002 5:51 AM
> To: diy_efi at diy-efi.org
> Subject: Re: MAP sensor
>
> Thanks for the Info. I tried everyone I know but no one could use that number.
> Maybe it is only good in the US. Anyway I got a 2nd hand ST185 GT4 Celica
> sensor. It reads to 18psi. I will be able to use that for now but will have to
> find a 3 bar eventually
>
> Steve
>
> Steve Ravet wrote:
>
> > There is info on GM map sensors on www.diy-efi.org/gmecm, click
> > component info.  These mount under the hood, send an electrical signal
> > back to the ECM.
> >
> > --steve
> >
> > Steve Spiers wrote:
> >
> > > Ive been looking for an afordable MAP sensor for my injector controller
> > > project. Ive been looking at OEM parts off different cars. I notice that
> > > most Aftermarket EMSs have the MAP sensor built into the ECU. I would
> > > assume the electronics would be built into the board somewhere, but
> > > there must be a mechanical to electrical transducer there somewhere. Are
> > > transducers like this avaiable? I could do it this way.
> >
> > --
> > Steve Ravet
> > steve.ravet at arm.com
> > ARM,Inc.
> > www.arm.com
> >
> > ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> > ----------------------------------------------------------------------------
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> > in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org