MAP sensor

Eck, Joel Joel.Eck at COMPAQ.com
Wed Apr 10 15:13:04 GMT 2002


try looking here : www.hondata.com/3barinstall.html

-----Original Message-----
From: Steve Spiers [mailto:s.spiers at xtra.co.nz]
Sent: Wednesday, April 10, 2002 5:51 AM
To: diy_efi at diy-efi.org
Subject: Re: MAP sensor


Thanks for the Info. I tried everyone I know but no one could use that number.
Maybe it is only good in the US. Anyway I got a 2nd hand ST185 GT4 Celica
sensor. It reads to 18psi. I will be able to use that for now but will have to
find a 3 bar eventually

Steve

Steve Ravet wrote:

> There is info on GM map sensors on www.diy-efi.org/gmecm, click
> component info.  These mount under the hood, send an electrical signal
> back to the ECM.
>
> --steve
>
> Steve Spiers wrote:
>
> > Ive been looking for an afordable MAP sensor for my injector controller
> > project. Ive been looking at OEM parts off different cars. I notice that
> > most Aftermarket EMSs have the MAP sensor built into the ECU. I would
> > assume the electronics would be built into the board somewhere, but
> > there must be a mechanical to electrical transducer there somewhere. Are
> > transducers like this avaiable? I could do it this way.
>
> --
> Steve Ravet
> steve.ravet at arm.com
> ARM,Inc.
> www.arm.com
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org



More information about the Diy_efi mailing list