[Diy_efi] Effect of detonation on measured mixture?

[William Shurvinton]

Hrrm. If you high side switch the coils rather than low side as everything
seems to, you can  switch from inductive to capacitive at higher RPMs.

(Yeah I know you don't believe in CDI).

Bill
----- Original Message -----
From: Bruce <nacelp at bright.net>
To: <Diy_efi at diy-efi.org>
Sent: Saturday, April 27, 1996 11:54 PM
Subject: Re: [Diy_efi] Effect of detonation on measured mixture?


>
> The advantage is dwell.
> On a V8 at 6K RPM, your just out of time to charge the coil.
> To a lesser degree, fewer cylinders, and lightly loaded ignitions don't
have
> a problem.  In a DIS Turbo buick v6, you have to keep the gap down to run
> any serious boost, or you'll have a miss, or just kind of blend over to
> compression ignition.
> Bruce
>



_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi