MAP sensor

[arnie]

Arnie responds with:

Believe these #s came from this site.  HTH
GM #16009886 2-bar
GM #16040749 3-bar
 

steve ravet wrote:
> 
> Looks like there are some bad part numbers on the gmecm MAP page.  I've
> done some internet searching and found the following possibilities:
> BARO 16006833 -- referenced by several WWW pages, but gmpartsdirect.com
> doesn't recognize it.
>      16006834 -- valid sensor part number, don't know if it's baro or
> not.
>      16006835 -- valid sensor part number, don't know if it's baro or
> not.
> 
> 1BAR 16137039 -- referenced by several WWW pages, valid part number,
> don't know if it the 1 bar MAP or not.
> 
> If someone can get me the correct data I'll update the WWW page.
> 
> --steve
> 
> > Thanks for the Info. I tried everyone I know but no one could use that number.
> > Maybe it is only good in the US. Anyway I got a 2nd hand ST185 GT4 Celica
> > sensor. It reads to 18psi. I will be able to use that for now but will have to
> > find a 3 bar eventually
> 
> --
> Steve Ravet
> steve.ravet at arm.com
> ARM,Inc.
> www.arm.com
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org