Low impedence EEC-IV modification

Justin Becker jgbecker at ameritech.net
Sun Apr 7 08:34:50 GMT 2002


Hi, I tried to search the archives to no avail, and I am sure it is there
somewhere; but I will ask anyway for I can not find it after months of
searching. I am trying to look for information on how to convert a high
impedance saturation injector driver setup to a peak and hold low impedance
injector driver setup on a SEFI  mass air EEC-IV application. I know it can
be done with some work, but word is the chips that were used are no longer
available. There is also a way to do it outside the ECM, but I would rather
do it in the current case. Does anyone have any ideas, experience, or can
steer me in the right direction? By the way, I will be driving injectors
with 2-3 ohms resistance.
Justin

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org



More information about the Diy_efi mailing list