[Diy_efi] Effect of detonation on measured mixture?

[Bruce]

I guess I might mention that I also run a *volt blaster* so that over 50%
TPS my charging voltage jumps to 14.9.
Figuring there is a several thousand fold multiplication for the ignition
system, and that the injectors, and fuel pump also like the jump in voltage,
it's just a little insurance.
Bruce


----- Original Message -----
From: "Stephen Andersen" <SAndersen at advan-tek.com>
Subject: RE: [Diy_efi] Effect of detonation on measured mixture?
> I guess it is actually Coil Near Plug for Bruce's example.  My
> car has Coil on Plug, and I know that on forced induction applications
> spark becomes a problem above about 16 psi or so.  I would be interested
> in discussing what the options are for spark at high boost to "boost"
> the ignition setup.
> Steve



_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi