Injector information please?

[Perry Harrington]

E5ZE is the family code, A3B is the rev code.

All Ford parts have the same middle number from car to car.

A gas line from a 65 mustang has the same middle part at the
gas line for a 95 mustang.

I don't know the number for injectors off the top of my head.
You could call your local Ford dealer and give them the part
in order to find the application, then lookup the application.

--Perry

On Fri, Mar 29, 2002 at 08:13:26PM -0800, The Holling's wrote:
> Hey all,
> 
> I have a set of injectors I am trying to find out the full specs for running with the Megasquirt project.  The injector's part # is E5ZE-A3B which seems to be similar to the mid 80's Ford Turbo injectors. My measurements show these as low impedance injectors with around 2.5 Ohm reading. They have a brown casing and look to be of the pintle design. >From what I have read, similar Ford versions flow somewhere from 35 to 42 lb/hr. 
> 
> Anyone with more accurate/detailed information on who is the manufacturer, what was the application, and what is the flow rating?
> 
> thanks for any help,
> -Jesse
> 
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

-- 
Perry Harrington             Linux rules all OSes.               APSoft      ()
perry at apsoft dot com 			                 Think Blue. /\

Those who would give up essential liberty to purchase a little temporary safety
deserve neither liberty or safety. Nor, are they likely to end up with either.
                             -- Benjamin Franklin

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org