MAP sensor (Cheap 3-bar!)

rob files rncfiles at hotmail.com
Thu Apr 11 17:42:07 GMT 2002


Hi all,

A friend passed this to me;

www.gmpartsdirect.com
P/N 16040749 $49

The Wells 2-bar from Autozone is $27 if anybody is looking for one of those.

-Rob


From: "Eck, Joel" <Joel.Eck at COMPAQ.com>
>Reply-To: diy_efi at diy-efi.org
>To: <diy_efi at diy-efi.org>
>Subject: RE: MAP sensor
>Date: Thu, 11 Apr 2002 11:25:40 -0500
>
>I don't know where they got the p/n from, but since they referenced Pep 
>Boys later on in the article, I am thinking that it may be a p/n from that 
>store. I tried to search on it, but the only hits for that p/n and map came 
>up were the hondata page and some korean site, couldn't read it because I 
>didn't have korean acrobat support installed....
>
>-----Original Message-----
From: Steve Spiers [mailto:s.spiers at xtra.co.nz]
>Sent: Thursday, April 11, 2002 4:51 AM
>To: diy_efi at diy-efi.org
>Subject: Re: MAP sensor
>
>
>Hi, interesting site. The part number there is totally different. Is it the 
>same 3
>bar GM sensor as listed in the GM_ECM page? has anyone elce purchased one 
>of
>these?
>
>Steve
>
>"Eck, Joel" wrote:
>
> > try looking here : www.hondata.com/3barinstall.html
> >
> > -----Original Message-----
> > From: Steve Spiers [mailto:s.spiers at xtra.co.nz]
> > Sent: Wednesday, April 10, 2002 5:51 AM
> > To: diy_efi at diy-efi.org
> > Subject: Re: MAP sensor
> >
> > Thanks for the Info. I tried everyone I know but no one could use that 
>number.
> > Maybe it is only good in the US. Anyway I got a 2nd hand ST185 GT4 
>Celica
> > sensor. It reads to 18psi. I will be able to use that for now but will 
>have to
> > find a 3 bar eventually
> >
> > Steve
> >
> > Steve Ravet wrote:
> >
> > > There is info on GM map sensors on www.diy-efi.org/gmecm, click
> > > component info.  These mount under the hood, send an electrical signal
> > > back to the ECM.
> > >
> > > --steve
> > >
> > > Steve Spiers wrote:
> > >
> > > > Ive been looking for an afordable MAP sensor for my injector 
>controller
> > > > project. Ive been looking at OEM parts off different cars. I notice 
>that
> > > > most Aftermarket EMSs have the MAP sensor built into the ECU. I 
>would
> > > > assume the electronics would be built into the board somewhere, but
> > > > there must be a mechanical to electrical transducer there somewhere. 
>Are
> > > > transducers like this avaiable? I could do it this way.
> > >
> > > --
> > > Steve Ravet
> > > steve.ravet at arm.com
> > > ARM,Inc.
> > > www.arm.com
> > >
> > > ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> > > 
>----------------------------------------------------------------------------
> > > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the 
>quotes)
> > > in the body of a message (not the subject) to 
>majordomo at lists.diy-efi.org
> >
> > 
>----------------------------------------------------------------------------
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the 
>quotes)
> > in the body of a message (not the subject) to 
>majordomo at lists.diy-efi.org
> >
> > 
>----------------------------------------------------------------------------
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the 
>quotes)
> > in the body of a message (not the subject) to 
>majordomo at lists.diy-efi.org
>
>
>----------------------------------------------------------------------------
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the 
>quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>----------------------------------------------------------------------------
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the 
>quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>


_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org



More information about the Diy_efi mailing list