[Diy-efi] Traction Control System - In progress (Update 1)
Tom Sharpe
twsharpe at webmail1.mtco.com
Fri Apr 19 14:40:50 GMT 2002
One quick point, You need to use USB or parallel port, serial is much to
slow for real time monitoring. Look at some of the data logger tools -
can't remember names but there are several. Tom
On Thu, 18 Apr 2002 21:34:59 -0700, "Crescent Kao" <crescent at c-
speedracing.com> wrote :
> Hello guys,
> We've been following the diy traction control system for some time now
and
> we've finally decided to get the ball rolling on our own. Our test vehicle
> is a 1999 Acura Integra equipped with ABS that is naturally aspirated (
> www.c-speedracing.com/integra.html )
>
> Our current approach is as follows (in a nut shell):
>
> - read input from existing ABS sensors
> - collect data from sensors to incar laptop via serial connection
_______________________________________________
Diy-efi mailing list
Diy-efi at diy-efi.org
http://diy-efi.org/mailman/listinfo/diy-efi
More information about the Diy_efi
mailing list