[Diy_efi] WB testing problems

[rr]

Check that the LED is not in backwards. Flat on LED
goes to bar on PCB footprint. Also check that the LED
is good (seen both).

Only need 12 v for the test out procedure (w/o sensor).

BobR.


Enzo wrote:

> Im having problems similiar to stephen.
> My problem is that my heater ready light is not turning on.
> I went ahead and tried step 25 and 26 but im getting very high readings..
> (step 25 im getting 7.76V when i should have .1V).  What could be wrong?
>
> I realized that i was only getting 12.9V to the heater circuit So i figured
> i would need more and maybe that's why it
> wasn't working BUT when i went and powered it up with 14.3V still nothing.
>
> What could be wrong?
>


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi