[Diy_efi] Injector dwell

[Dan Zorde]

Hi all,

Injector dwell, probably the wrong term to use, but here goes.  A friend
of mine has just got hold of a Perfect Power ECU, in the programming
section they ask for an open time before switching from ON current to
hold current for the injector (ie. peak and hold style, 4A to 2A).

Now when using standard saturated injectors would it be wise to make
this time greater than the max on time for the injector to ensure it
never switches to hold current during the injector on time, or will a
saturated injector remain open when switching to a hold current ?

Cheers

Dan  dzorde at erggroup.com

---------------------------- ERG Group --------------------------
 The contents of this email and any attachments are confidential
 and may only be read by the intended recipient.
-----------------------------------------------------------------


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi