August 2002 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Aug 1 00:10:42 GMT 2002
Ending: Fri Aug 30 20:33:51 GMT 2002
Messages: 590

• [Diy_efi] Re: New toyota TCCS info   alex averbuch
• [Diy_efi] ignition timing variation   Matt Donohoe
• [Diy_efi] sequential injection timing   Harvey Doyle
• [Diy_efi] sequential injection timing   Bruce
• [Diy_efi] sequential injection timing   Djfreggens at aol.com
• [Diy_efi] Kawasaki 100 cc Ignition upgrade   Eric Schimelpfenig
• [Diy_efi] Kawasaki 100 cc Ignition upgrade   Djfreggens at aol.com
• [Diy_efi] sequential injection timing   Bruce
• [Diy_efi] sequential injection timing   Jared Ryan
• [Diy_efi] sequential injection timing   Djfreggens at aol.com
• [Diy_efi] Kawasaki 100 cc Ignition upgrade   Eric Schimelpfenig
• [Diy_efi] Kawasaki 100 cc Ignition upgrade   Djfreggens at aol.com
• [Diy_efi] Re: New toyota TCCS info   Chad Clendening
• [Diy_efi] Kawasaki 100 cc Ignition upgrade   Perry Harrington
• [Diy_efi] Kawasaki 100 cc Ignition upgrade   Djfreggens at aol.com
• [Diy_efi] higher pressure pumps for water injection   Chris Conlon
• [Diy_efi] Re: New toyota TCCS info   Chris Conlon
• [Diy_efi] newbie with a project   Greg Hermann
• [Diy_efi] Kawasaki 100 cc Ignition upgrade   Perry Harrington
• [Diy_efi] EMS Fueling Calculations   alex averbuch
• [Diy_efi] EMS Fueling Calculations   Mark
• [Diy_efi] EMS Fueling Calculations   Brian Dessent
• [Diy_efi] Problems getting every posting 2 times..   Marc Reibel
• [Diy_efi] Injector dwell   Dan Zorde
• [Diy_efi] Injector dwell   bill.shurvinton at nokia.com
• [Diy_efi] Re: New toyota TCCS info   SIMON HART
• [Diy_efi] sequential injection timing   Eric Fahlgren
• [Diy_efi] newbie with a project   Eric Fahlgren
• [Diy_efi] sequential injection timing   Bruce
• [Diy_efi] higher pressure pumps for water injection   Eric Fahlgren
• [Diy_efi] Spark Plug readings -- EEC-IV info   Gregory A. Parmer
• [Diy_efi] sequential injection timing   Eric Fahlgren
• [Diy_efi] sequential injection timing   bill.shurvinton at nokia.com
• [Diy_efi] sequential injection timing   bill.shurvinton at nokia.com
• [Diy_efi] sequential injection timing   Bruce
• [Diy_efi] higher pressure pumps for water injection   Chris Conlon
• [Diy_efi] perfect power systems   Tom Cheung
• [Diy_efi] ignition timing variation   huw scourfield
• [Diy_efi] Re: sequential injection timing   Garfield Willis
• [Diy_efi] ignition timing variation   Arnoud van der Wel
• [Diy_efi] Re: New toyota TCCS info   Jerry Wills
• [Diy_efi] higher pressure pumps for water injection   Eric Fahlgren
• [Diy_efi] Bosch in-line fuel pump electrical specs.   Toffer Liu
• [Diy_efi] higher pressure pumps for water injection   Ron Schroeder
• [Diy_efi] sequential injection timing   Eric Fahlgren
• [Diy_efi] Re: New toyota TCCS info   SIMON HART
• [Diy_efi] sequential injection timing   Eric Fahlgren
• [Diy_efi] higher pressure pumps for water injection   Eric Fahlgren
• [Diy_efi] higher pressure pumps for water injection   Djfreggens at aol.com
• [Diy_efi] Spark Plug readings -- EEC-IV info   Dave Williams
• [Diy_efi] higher pressure pumps for water injection   Eric Fahlgren
• [Diy_efi] higher pressure pumps for water injection   Scott F. Williams
• [Diy_efi] sequential injection timing   Bruce
• [Diy_efi] sequential injection timing   joe graham
• [Diy_efi] sequential injection timing   Bruce
• [Diy_efi] sequential injection timing   Brian Michalk
• [Diy_efi] sequential injection timing   William Shurvinton
• [Diy_efi] sequential injection timing   Programmer
• [Diy_efi] higher pressure pumps for water injection   Chris Conlon
• [Diy_efi] sequential injection timing   Bruce
• [Diy_efi] sequential injection timing   Bruce
• [Diy_efi] sequential injection timing   Bruce
• [Diy_efi] sequential injection timing   huw scourfield
• [Diy_efi] Re: EMS inputs/output?   huw scourfield
• [Diy_efi] sequential injection timing   joe graham
• [Diy_efi] sequential injection timing   Bruce
• [Diy_efi] DIY-EFI References   Bobby Riggs
• [Diy_efi] current sense MOSFETs   Phil Hunter
• [Diy_efi] higher pressure pumps for water injection   bcroe at juno.com
• [Diy_efi] Bosch in-line fuel pump electrical specs.   Stephen Hobbs
• [Diy_efi] newbie with a project   steve ravet
• [Diy_efi] current sense MOSFETs   bcroe at juno.com
• [Diy_efi] newbie with a project   Scott F. Williams
• [Diy_efi] Re: water injection   Bill Washington
• [Diy_efi] sequential injection timing   bill.shurvinton at nokia.com
• [Diy_efi] TCCS 6801 ROM extraction   SIMON HART
• [Diy_efi] TCCS 6801 ROM extraction   Tony Bryant
• [Diy_efi] higher pressure pumps for water injection   Porter, Bill
• [Diy_efi] Bosch in-line fuel pump electrical specs.   Jorge Garcia
• [Diy_efi] sequential injection timing   Eric Fahlgren
• [Diy_efi] higher pressure pumps for water injection   Eric Fahlgren
• [Diy_efi] Bosch in-line fuel pump electrical specs.   steve ravet
• [Diy_efi] higher pressure pumps for water injection   Eric Fahlgren
• [Diy_efi] Bosch in-line fuel pump electrical specs.   J. Creech
• [Diy_efi] injector drivers: how to pick   Scott F. Williams
• [Diy_efi] injector drivers: how to pick   Marteney, Steve
• [Diy_efi] injector drivers: how to pick   Eric Fahlgren
• [Diy_efi] Bosch in-line fuel pump electrical specs.   Jorge Garcia
• [Diy_efi] Re: TCCS 6801 ROM extraction   Jerry Wills
• [Diy_efi] sequential injection timing   Chris Conlon
• [Diy_efi] Fuel Pump speed controller   FetterKirk at aol.com
• [Diy_efi] sequential injection timing   William Shurvinton
• [Diy_efi] Fuel Pump speed controller   bcroe at juno.com
• [Diy_efi] Fuel Pump speed controller   md4etal
• [Diy_efi] Fuel Pump speed controller   Scott F. Williams
• [Diy_efi] DIY-EFI References   Shannen Durphey
• [Diy_efi] Fuel Pump speed controller   Greg Hermann
• [Diy_efi] TCCS 6801 ROM extraction   efi_student
• [Diy_efi] DIY-EFI References   Greg Hermann
• [Diy_efi] Fuel Pump speed controller   efi_student
• [Diy_efi] Fuel Pump speed controller   Bruce
• [Diy_efi] need help tuning toyota ignition timing curve   Toffer Liu
• [Diy_efi] WB controller   Dave Dahlgren
• [Diy_efi] Fuel Pump speed controller   Greg Hermann
• [Diy_efi] WB controller   Bruce
• [Diy_efi] WB controller   Dave Dahlgren
• [Diy_efi] WB controller   Bruce
• [Diy_efi] WB controller   Mike
• [Diy_efi] WB controller   Dave Williams
• [Diy_efi] Sequential fire setup   mazak
• [Diy_efi] WB controller   Bruce
• [Diy_efi] WB controller   Mike
• [Diy_efi] WB controller   Bruce
• [Diy_efi] WB controller   Mike
• [Diy_efi] Early Gasoline Fuel Injection   bcroe at juno.com
• [Diy_efi] Early Gasoline Fuel Injection   Mike
• [Diy_efi] WB controller   bcroe at juno.com
• [Diy_efi] WB controller   elcamino73
• [Diy_efi] Sequential fire setup   Djfreggens at aol.com
• [Diy_efi] Re: sequential injection timing   Greg Hermann
• [Diy_efi] WB controller   Dave Dahlgren
• [Diy_efi] Early Gasoline Fuel Injection   bcroe at juno.com
• [Diy_efi] WB controller   Bruce
• [Diy_efi] Early Gasoline Fuel Injection   William Shurvinton
• [Diy_efi] Early Gasoline Fuel Injection   Dave Williams
• [Diy_efi] WB controller   joe graham
• [Diy_efi] WB controller   Dave Dahlgren
• [Diy_efi] WB controller   Bruce
• [Diy_efi] WB controller   Bruce
• [Diy_efi] WB controller   944Technologist
• [Diy_efi] WB controller   Gabe
• [Diy_efi] WB controller   Dave Dahlgren
• [Diy_efi] Re: sequential injection timing   Brian Michalk
• [Diy_efi] WB controller   944Technologist
• [Diy_efi] DIY_WB Availabilty of PCBs   944Technologist
• [Diy_efi] WB controller   Bruce
• [Diy_efi] WB controller   Shannen Durphey
• [Diy_efi] CIS EFI via Fuel Pump PWM   ARKK
• [Diy_efi] DIY_WB Availabilty of PCBs   Bruce
• [Diy_efi] WB controller   Greg Hermann
• [Diy_efi] DIY_WB Availabilty of PCBs   rr
• [Diy_efi] Re: sequential injection timing   Greg Hermann
• [Diy_efi] DIY_WB Availabilty of PCBs   944Technologist
• [Diy_efi] Bosch in-line fuel pump electrical specs.   Stephen Hobbs
• [Diy_efi] WB controller   Dave Dahlgren
• [Diy_efi] WB controller   Garfield Willis
• [Diy_efi] WB controller   steve ravet
• [Diy_efi] CIS EFI via Fuel Pump PWM   Bernd Felsche
• [Diy_efi] Bosch in-line fuel pump electrical specs.   Jorge Garcia
• [Diy_efi] CIS EFI via Fuel Pump PWM   Bruce
• [Diy_efi] Bosch Overrun Cutoff valve specs?   Mark S. Riley
• [Diy_efi] CIS EFI via Fuel Pump PWM   Marc Reviel
• [Diy_efi] PC controler on the sight   Grant9 at aol.com
• [Diy_efi] Early Gasoline Fuel Injection   bcroe at juno.com
• [Diy_efi] Timing   john smith
• [Diy_efi] WB controller   Dave Williams
• [Diy_efi] Re: sequential injection timing   Dave Williams
• [Diy_efi] Re: New toyota TCCS info   Mos
• [Diy_efi] Re: sequential injection timing   Greg Hermann
• [Diy_efi] WB controller   Gabe
• [Diy_efi] CIS EFI via Fuel Pump PWM   ARKK
• [Diy_efi] Early Gasoline Fuel Injection   Mike
• [Diy_efi] Driving injector: forward biased diode between B and C of NPN   Stephen Webb
• [Diy_efi] Driving injector: forward biased diode between B and C of NPN   Perry Harrington
• [Diy_efi] Driving injector: forward biased diode between B   Mike
• [Diy_efi] The ICE Wars (was sequential injection timing)   Steve N.
• [Diy_efi] Sequential fire setup   Dave Dahlgren
• [Diy_efi] The ICE Wars (was sequential injection timing)   Greg Hermann
• [Diy_efi] CIS EFI via Fuel Pump PWM   steve ravet
• [Diy_efi] Timing   maier_markus at t-online.de
• [Diy_efi] CIS EFI via Fuel Pump PWM   Mike
• [Diy_efi] Sequential fire setup   Programmer
• [Diy_efi] WB controller   Bruce
• [Diy_efi] Driving injector: forward biased diode between B and C of NPN   944Technologist
• [Diy_efi] Sequential fire setup   William Shurvinton
• [Diy_efi] Sequential fire setup   Dave Dahlgren
• [Diy_efi] Sequential fire setup   Bruce
• [Diy_efi] Sequential fire setup   Dave Dahlgren
• [Diy_efi] Intro and Questions...   Dave Gallant, 12 Point Racing
• [Diy_efi] Sequential fire setup   William Shurvinton
• [Diy_efi] Driving injector: forward biased diode between B and C of   Brian Dessent
• [Diy_efi] Intro and Questions...   Brian Dessent
• [Diy_efi] Intro and Questions...   David Gallant, 12 Point Racing
• [Diy_efi] Sequential fire setup   Bruce
• [Diy_efi] CIS EFI via Fuel Pump PWM   Bernd Felsche
• [Diy_efi] Driving injector: forward biased diode between B and   Stephen Webb
• [Diy_efi] drb 2 chrysler scanner   Djfreggens at aol.com
• [Diy_efi] Bosch in-line fuel pump electrical specs.   Stephen Hobbs
• [Diy_efi] CIS EFI via Fuel Pump PWM   steve ravet
• [Diy_efi] Fuel Pump PWM   bcroe at juno.com
• [Diy_efi] CIS EFI via Fuel Pump PWM   Mike
• [Diy_efi] Fuel Pump PWM   Mike
• [Diy_efi] Re: Fuel Pump PWM   Jerry Wills
• [Diy_efi] Re: Fuel Pump PWM   Mike
• [Diy_efi] Sequential fire setup   mazak
• [Diy_efi] Re: New toyota TCCS info   Jerry Wills
• [Diy_efi] Re: Fuel Pump PWM   Jerry Wills
• [Diy_efi] Re: Fuel Pump PWM   Mike
• [Diy_efi] Re: Fuel Pump PWM   bill.shurvinton at nokia.com
• [Diy_efi] Re: Fuel Pump PWM   Mike
• [Diy_efi] Re: New toyota TCCS info   Mos
• [Diy_efi] Re: Diy_efi digest, Vol 1 #228 - 9 msgs   Kenny Bauman
• [Diy_efi] CIS EFI via Fuel Pump PWM   Kenny Bauman
• [Diy_efi] CIS EFI via Fuel Pump PWM   Kenny Bauman
• [Diy_efi] CIS EFI via Fuel Pump PWM   Bernd Felsche
• [Diy_efi] Re: Diy_efi digest, Vol 1 #228 - 9 msgs   Brian Dessent
• [Diy_efi] Re: Diy_efi digest, Vol 1 #228 - 9 msgs   Brian Dessent
• [Diy_efi] Re: modulus of elacticity for gasoline?   Phil Lamovie
• [Diy_efi] F/V for logging a tach signal   Steve Hutson
• [Diy_efi] Honda WBO2 connectors?   Justin Starkey at VMP
• [Diy_efi] Honda WBO2 connectors?   Bruce
• [Diy_efi] Honda WBO2 connectors?   steve ravet
• [Diy_efi] re. CIS EFI via Fuel Pump PWM   Kenny Bauman
• [Diy_efi] Intro and Questions...   Ron McDonald
• [Diy_efi] Honda WBO2 connectors?   bcroe at juno.com
• OT. Re: [Diy_efi] Re: Fuel Pump PWM   Mos
• [Diy_efi] Honda WBO2 connectors? got sources   Justin Starkey at VMP
• [Diy_efi] Re: Diy_efi digest, Vol 1 #229 - 14 msgs   Bill Wiese
• [Diy_efi] CIS EFI via Fuel Pump PWM   huw scourfield
• [Diy_efi] CIS EFI via Fuel Pump PWM   Mike
• [Diy_efi] re. CIS EFI via Fuel Pump PWM   Mike
• [Diy_efi] Re: New toyota TCCS info   Mos
• [Diy_efi] Re: New toyota TCCS info   Jerry Wills
• [Diy_efi] Re: New toyota TCCS info   efi_student
• [Diy_efi] RE: RE: New toyota TCCS info   SIMON HART
• [Diy_efi] F/V for logging a tach signal   Bernadette & Don Ricciardiello
• [Diy_efi] CIS EFI via Fuel Pump PWM   steve ravet
• [Diy_efi] CIS EFI via Fuel Pump PWM   Stephen Webb
• [Diy_efi] CIS EFI via Fuel Pump PWM   Mike
• [Diy_efi] CIS EFI via Fuel Pump PWM   Mike
• [Diy_efi] CIS EFI via Fuel Pump PWM   Brian Michalk
• [Diy_efi] CIS EFI via Fuel Pump PWM   Mike
• [Diy_efi] CIS EFI via Fuel Pump PWM   steve ravet
• [Diy_efi] CIS EFI via Fuel Pump PWM   Mike
• [Diy_efi] CIS EFI via Fuel Pump PWM   Marc Reviel
• [Diy_efi] Kawasaki 100 cc Ignition upgrade   Mike Kelble
• [Diy_efi] CIS EFI via Fuel Pump PWM   Bernd Felsche
• [Diy_efi] CIS EFI via Fuel Pump PWM   Stephen Webb
• [Diy_efi] Ford Coil Plug   Mike Blakey
• [Diy_efi] How many Bits for PWM injection driver?   Les Dittert
• [Diy_efi] current sense MOSFETs   jim cottrill
• [Diy_efi] Ford Coil Plug   Djfreggens at aol.com
• [Diy_efi] Ford Coil Plug   Mike Blakey
• [Diy_efi] CIS EFI via Fuel Pump PWM   Bernd Felsche
• [Diy_efi] How many Bits for PWM injection driver?   Mike
• [Diy_efi] Re: Diy_efi digest, Vol 1 #231 - 12 msgs   Bill Washington
• [Diy_efi] Maybe a little O2 sense   Bruce
• [Diy_efi] CIS EFI via Fuel Pump PWM   Stephen Webb
• [Diy_efi] MAPS   Matt Donohoe
• [Diy_efi] MAPS   Bruce
• [Diy_efi] Ford Coil Plug   Rich M
• [Diy_efi] CIS EFI via Fuel Pump PWM   huw scourfield
• [Diy_efi] more who-uses-what-chips-where-and-when...   Bill Wiese
• [Diy_efi] Re: Diy_efi digest, Vol 1 #231 - 12 msgs   Mike
• [Diy_efi] CIS EFI via Fuel Pump PWM   Mike
• [Diy_efi] Re: CIS EFI via Fuel Pump PWM   Kenny Bauman
• [Diy_efi] CIS EFI via Fuel Pump PWM   Tlsalt at aol.com
• [Diy_efi] Re: CIS EFI via Fuel Pump PWM   Kenny W
• [Diy_efi] CIS EFI via Fuel Pump PWM   Stephen Webb
• [Diy_efi] How many Bits for PWM injection driver?   Les Dittert
• [Diy_efi] CIS EFI via Fuel Pump PWM   Kenny W
• [Diy_efi] How many Bits for PWM injection driver?   Dave Dahlgren
• [Diy_efi] I always wondered...   Eric Fahlgren
• [Diy_efi] How many Bits for PWM injection driver?   Mike
• [Diy_efi] Re: MAPS   Donald P. Horkheimer
• [Diy_efi] How many Bits for PWM injection driver?   Kenny W
• [Diy_efi] I always wondered...   Marteney, Steve
• [Diy_efi] How many Bits for PWM injection driver?   Dave Dahlgren
• [Diy_efi] I always wondered...   Bruce
• [Diy_efi] How many Bits for PWM injection driver?   Kenny W
• [Diy_efi] How many Bits for PWM injection driver?   Stephen Webb
• [Diy_efi] How many Bits for PWM injection driver?   Stephen Webb
• [Diy_efi] How many Bits for PWM injection driver?   Kenny W
• [Diy_efi] I always wondered...   Stephen Webb
• [Diy_efi] Hitachi Micro Part Number   Amenson Scott (AC/ESC4)
• [Diy_efi] I always wondered...   Kenny W
• [Diy_efi] I always wondered...   The McConnell's
• [Diy_efi] I always wondered...   Tomas Sokorai Sch.
• [Diy_efi] Maybe a little O2 sense   bcroe at juno.com
• [Diy_efi] current sense MOSFETs   bcroe at juno.com
• [Diy_efi] I always wondered...   Tony Bryant
• [Diy_efi] How many Bits for PWM injection driver?   Les Dittert
• [Diy_efi] Re: I always wondered...   Dan Zorde
• [Diy_efi] How many Bits for PWM injection driver?   Greg Hermann
• [Diy_efi] Re: CIS EFI via Fuel Pump PWM   Bernd Felsche
• [Diy_efi] Re: CIS EFI via Fuel Pump PWM   Bernd Felsche
• [Diy_efi] Re: I always wondered...   Gerhard Mueller
• [Diy_efi] Ford Coil Plug   Jeffrey Engel
• [Diy_efi] I always wondered...   Stephen Webb
• [Diy_efi] CIS EFI via Fuel Pump PWM   bcroe at juno.com
• [Diy_efi] How many Bits for PWM injection driver?   bill.shurvinton at nokia.com
• [Diy_efi] [Fwd: 88SF-12029-AA12V Coil connector.]   steve ravet
• [Diy_efi] I always wondered...   Ne14RoxCJ at aol.com
• [Diy_efi] CIS EFI via Fuel Pump PWM   bcroe at juno.com
• [Diy_efi] Bosch LE2/LU2 Jetronic   Steve Spiers
• [Diy_efi] I always wondered...   The McConnell's
• [Diy_efi] o2 bung sensor placement   Nick Starai
• [Diy_efi] o2 bung sensor placement   Justin Starkey at VMP
• [Diy_efi] o2 bung sensor placement   Bruce
• [Diy_efi] o2 bung sensor placement   Nick Starai
• [Diy_efi] CIS EFI via Fuel Pump PWM   huw scourfield
• [Diy_efi] Fw: wide-band O2 sensor comparison   Bruce
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Bruce
• [Diy_efi] acceleration enrichment? retard or advance ignition timing?   Toffer Liu
• [Diy_efi] acceleration enrichment? retard or advance ignition timing?   Bruce
• [Diy_efi] Bosch LE2/LU2 Jetronic   Pawel Wozniczka
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Bruce
• [Diy_efi] CIS EFI via Fuel Pump PWM   Mike
• [Diy_efi] (no subject)   Dewey Lawrence
• [Diy_efi] (no subject)   Bruce
• [Diy_efi] Motec wide band O2 gear, modding probe mounting??   Chris Wilson
• [Diy_efi] Motec wide band O2 gear, modding probe mounting??   Bruce
• [Diy_efi] Motec wide band O2 gear, modding probe mounting??   Chris Wilson
• [Diy_efi] Bosch LE2/LU2 Jetronic   Bill Washington
• [Diy_efi] Bosch LE2/LU2 Jetronic   Bill Washington
• [Diy_efi] acceleration enrichment? retard or advance ignition timing?   Axel Rietschin
• [Diy_efi] intake manifold runlengths   Marcell Gal
• [Diy_efi] $ab program code found in 1227302 ??   Djfreggens at aol.com
• [Diy_efi] Fw: wide-band O2 sensor comparison   Garfield Willis
• [Diy_efi] help   Dewey Lawrence
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Garfield Willis
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Andrew Brownsword
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Mike
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Jeffrey Engel
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Andrew Brownsword
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Bruce
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   r71chevy at earthlink.net
• [Diy_efi] variable-frequency MAP/MAF sensors questions   Sergio Alejandro Gonzalez
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Garfield Willis
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Garfield Willis
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Eck, Joel
• [Diy_efi] how does GM spark acceleration enrichment work?   Toffer Liu
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   rr
• [Diy_efi] Re: [Efi332] Fw: wide-band O2 sensor comparison   Bruce
• [Diy_efi] variable-frequency MAP/MAF sensors questions   The Punisher
• [Diy_efi] 2732's 27c32's group buy.   Djfreggens at aol.com
• [Diy_efi] Fw: Static injectors, and misc stuff, possibly a good read   Bruce
• [Diy_efi] 2732's 27c32's group buy.   Mike
• [Diy_efi] switch mode replacement for to-220 7805?   Chris Conlon
• [Diy_efi] Fw: DIY-WB is down   Bruce
• [Diy_efi] Re: switch mode replacement for to-220 7805?   Robert W. Hughes
• [Diy_efi] switch mode replacement for to-220 7805?   Brian Dessent
• [Diy_efi] switch mode replacement for to-220 7805?   MSCHWALL at sbcglobal.net
• [Diy_efi] switch mode replacement for to-220 7805?   md4etal
• [Diy_efi] switch mode replacement for to-220 7805?   Marteney, Steve
• [Diy_efi] Fw: Misc injector stuff, hardly worth reading   Bruce
• [Diy_efi] Fw: Misc injector stuff, hardly worth reading   Perry Harrington
• [Diy_efi] switch mode replacement for to-220 7805?   Richard M
• [Diy_efi] oopic2 based controller   Bino Lardo
• [Diy_efi] oopic2 based controller   bill.shurvinton at nokia.com
• [Diy_efi] oopic2 based controller   Les Dittert
• [Diy_efi] Fw: Misc injector stuff, hardly worth reading   Bruce
• [Diy_efi] oopic2 based controller   Dave Williams
• [Diy_efi] oopic2 based controller   Bino Lardo
• [Diy_efi] extending wires on FJO WB? (honda sensor)   Justin Starkey at VMP
• [Diy_efi] MAF calibration   Heath, Tom
• [Diy_efi] oopic2 based controller   William Shurvinton
• [Diy_efi] MAF calibration   Porter, Bill
• [Diy_efi] extending wires on FJO WB? (honda sensor)   Peter Gargano
• [Diy_efi] MAF calibration   Perry Harrington
• [Diy_efi] extending wires on FJO WB? (honda sensor)   Garfield Willis
• [Diy_efi] MAF calibration   Mike
• [Diy_efi] oopic2 based controller   Bino Lardo
• [Diy_efi] oopic2 based controller   The Punisher
• [Diy_efi] Re: [Gmecm] 16141470 eprom uploaded   md4etal
• [Diy_efi] extending wires on FJO WB? (honda sensor)   Les Dittert
• [Diy_efi] MAF calibration   Heath, Tom
• [Diy_efi] low-impedance injectors w/saturated driver   Scott F. Williams
• [Diy_efi] Fuel Regulators   Mark
• [Diy_efi] Fixed frequency PWM batch mode FI   Les Dittert
• [Diy_efi] oopic2 based controller   bill.shurvinton at nokia.com
• [Diy_efi] Re: Re: oopic2 based controller   Dan Zorde
• [Diy_efi] MAF calibration   Andrew Brownsword
• [Diy_efi] oopic2 based controller   huw scourfield
• [Diy_efi] Motec PLM   Axel Rietschin
• [Diy_efi] Stick vs. Auto Maps   Perry Harrington
• [Diy_efi] Stick vs. Auto Maps   Jason Link
• [Diy_efi] Fixed frequency PWM batch mode FI   Les Dittert
• [Diy_efi] Fuel Regulators   Les Dittert
• AW: [Diy_efi] Motec PLM   Schaffer Klaus Maria
• [Diy_efi] Motec PLM   Bruce
• [Diy_efi] Fixed frequency PWM batch mode FI   Bernd Felsche
• [Diy_efi] O2 Sensor or Computer   Peter Foote
• [Diy_efi] Torque Converter Speed Settings   Peter Foote
• [Diy_efi] Torque Converter Speed Settings   Bruce
• [Diy_efi] Fixed frequency PWM batch mode FI   Ne14RoxCJ at aol.com
• [Diy_efi] Return line and oxidation   Phil Lamovie
• [Diy_efi] Interesting Ford patent   Perry Harrington
• [Diy_efi] Return line and oxidation   Ne14RoxCJ at aol.com
• [Diy_efi] Return line and oxidation   Phil Lamovie
• [Diy_efi] Torque Converter Speed Settings   bill.shurvinton at nokia.com
• [Diy_efi] oopic2 based controller   bill.shurvinton at nokia.com
• [Diy_efi] low-impedance injectors w/saturated driver   Van Setten, Tim at ACSSD
• [Diy_efi] Stick vs. Auto Maps   Bruce
• [Diy_efi] Motec PLM   Chris Wilson
• [Diy_efi] Stick vs. Auto Maps   Guncotton
• [Diy_efi] Return line and oxidation was: Fuel Regulators   Bruce
• [Diy_efi] Return line and oxidation was: Fuel Regulators   Marteney, Steve
• [Diy_efi] oopic2 based controller   William Shurvinton
• [Diy_efi] Fixed frequency PWM batch mode FI   Kenny W
• [Diy_efi] Fixed frequency PWM batch mode FI   Robert W. Hughes
• [Diy_efi] MAF calibration   Heath, Tom
• [Diy_efi] low-impedance injectors w/saturated driver   bill.shurvinton at nokia.com
• [Diy_efi] Fuel Regulators   bill.shurvinton at nokia.com
• [Diy_efi] Fixed frequency PWM batch mode FI   Ron Schroeder
• [Diy_efi] [Fwd: New Ford Fuel Injectors]   steve ravet
• [Diy_efi] Fixed frequency PWM batch mode FI   Bruce
• [Diy_efi] Fixed frequency PWM batch mode FI   Bevan Weiss
• [Diy_efi] RE: Diy_efi digest, Vol 1 #248 - 6 msgs   Porter, Bill
• [Diy_efi] Fixed frequency PWM batch mode FI   bill.shurvinton at nokia.com
• [Diy_efi] WBO2 and engine load question   Steve Hutson
• [Diy_efi] MAF calibration   Perry Harrington
• [Diy_efi] low-impedance injectors w/saturated driver   steve ravet
• [Diy_efi] Motec PLM   Jose Santana
• [Diy_efi] oopic2 based controller   Bino Lardo
• [Diy_efi] Fixed frequency PWM batch mode FI   Jorgen Karlsson
• [Diy_efi] Fixed frequency PWM batch mode FI   Lasse Langwadt Christensen
• [Diy_efi] oopic2 based controller   Bino Lardo
• [Diy_efi] Logging software for the 5300 FMD   Peter Gargano
• [Diy_efi] oopic2 based controller   bill.shurvinton at nokia.com
• [Diy_efi] CBR600 ignition pulse generator   J
• [Diy_efi] Logging software for the 5300 FMD   Bruce
• [Diy_efi] Return line and oxidation   Eck, Joel
• [Diy_efi] Return line and oxidation   Ne14RoxCJ at aol.com
• [Diy_efi] Crank trigger resolution   Rod Hiorns
• [Diy_efi] Return line and oxidation   bill.shurvinton at nokia.com
• [Diy_efi] Interesting Ford patent   Tomas Sokorai Sch.
• [Diy_efi] Torque Converter Speed Settings   Dan Griffin
• [Diy_efi] O2 Sensor or Computer   steve ravet
• [Diy_efi] Crank trigger resolution   Phil Lamovie
• [Diy_efi] Interesting Ford patent   Phil Lamovie
• [Diy_efi] O2 Sensor or Computer   Bruce
• [Diy_efi] Fixed frequency PWM batch mode FI   Bruce
• [Diy_efi] DIY WB O2 sensor availability   Martin, Sam
• [Diy_efi] Fixed frequency PWM batch mode FI   Les Dittert
• [Diy_efi] Logging software for the 5300 FMD   Perry Harrington
• [Diy_efi] Fixed frequency PWM batch mode FI   William Shurvinton
• [Diy_efi] Interesting Ford patent   Marteney, Steve
• [Diy_efi] DIY-EFI References (fwd)   Mark Wilcutts
• [Diy_efi] Fuel Regulators   Mark
• AW: [Diy_efi] Motec PLM   Schaffer Klaus Maria
• [Diy_efi] DIY WB O2 sensor availability   rr
• [Diy_efi] 3 channel ignition module....GM part?   Derek
• [Diy_efi] 68HC16 disassembler wanted   Robert B.
• [Diy_efi] DIY WB O2 sensor availability   Martin, Sam
• [Diy_efi] oopic2 based controller   The Punisher
• [Diy_efi] Re: oopic2 based controller   Marcell Gal
• [Diy_efi] LS1 coils, smart or dumb?   Derek
• [Diy_efi] eec-iv program questions   Heath, Tom
• [Diy_efi] DIY WB O2 sensor availability   Les Dittert
• [Diy_efi] Fixed frequency PWM batch mode FI   Bruce
• [Diy_efi] if YOU were bored enough to disassemble...   Dave Gallant, 12 Point Racing
• [Diy_efi] O2 Sensor or Computer   Peter Foote
• [Diy_efi] are uC requirements really that high?   Marcell Gal
• [Diy_efi] Return line and oxidation   bill duggan
• SV: [Diy_efi] DIY WB O2 sensor availability   Niklas Rosenberg TACSSt
• [Diy_efi] 4 wire o2 sensor   john smith
• [Diy_efi] Fixed frequency PWM batch mode FI   Mike
• [Diy_efi] Fuel Regulators   Mike
• [Diy_efi] O2 Sensor or Computer   Shannen Durphey
• [Diy_efi] Crank trigger resolution   Dave Dahlgren
• [Diy_efi] Re: oopic2 based controller   Dan Zorde
• [Diy_efi] Crank trigger resolution   Bernd Felsche
• [Diy_efi] eec-iv program questions   Perry Harrington
• [Diy_efi] LM2902 which one to use   Martin, Sam
• [Diy_efi] Fixed frequency PWM batch mode FI   Djfreggens at aol.com
• [Diy_efi] LS1 coils, smart or dumb?   Dave Dahlgren
• [Diy_efi] 3 channel ignition module....GM part?   Djfreggens at aol.com
• [Diy_efi] Fixed frequency PWM batch mode FI   Brian Dessent
• [Diy_efi] WB sensors for $125   Simpson[Scott231 at gnttype.org]
• [Diy_efi] Getting access to SAE papers   Dan D'Andrea
• [Diy_efi] are uC requirements really that high?   William Shurvinton
• [Diy_efi] WB O2 Sensor Availability   Phred Strickland
• [Diy_efi] [Fwd: Crank trigger resolution]   Phil Lamovie
• [Diy_efi] if YOU were bored enough to disassemble...   Brian Dessent
• [Diy_efi] service manual on CD?   steve ravet
• [Diy_efi] Fixed frequency PWM batch mode FI   Ron Schroeder
• [Diy_efi] LS1 coils, smart or dumb?   r71chevy at earthlink.net
• [Diy_efi] hotrodder seeks clue   Scott F. Williams
• [Diy_efi] TBI's for VW aircooled, which are most compact for center mount?   Les Dittert
• [Diy_efi] Ford Trouble Codes   Eric Schimelpfenig
• [Diy_efi] Getting access to SAE papers   Igor Dorrestijn
• [Diy_efi] Which LM2902 to use   bcroe at juno.com
• [Diy_efi] idle control strategy for SD systems w/o bypass air control?   Jerry Wills
• [Diy_efi] hotrodder seeks clue   Shannen at grolen.com
• [Diy_efi] Re: oopic2 based controller   Kent Martin
• [Diy_efi] Fixed frequency PWM batch mode FI   steve ravet
• [Diy_efi] Getting access to SAE papers   Bernd Felsche
• [Diy_efi] service manual on CD?   944Technologist
• AW: [Diy_efi] 3 channel ignition module....GM part?   Rausch, Bernd
• [Diy_efi] 4-wire O2 identification   Peter Foote
• [Diy_efi] Fixed frequency PWM batch mode FI   Dave Dahlgren
• [Diy_efi] LM2902 which one to use   rr
• [Diy_efi] Re: Ford Trouble Codes   Gerhard Mueller
• [Diy_efi] service manual on CD?   Mike Schwall
• [Diy_efi] if YOU were bored enough to disassemble...   Andrew Brownsword
• [Diy_efi] default ignition tables   Kent Martin
• [Diy_efi] Fuel Regulators   Mark
• [Diy_efi] hotrodder seeks clue   Brian Dessent
• [Diy_efi] Re: Diy_efi digest, Vol 1 #258 - 15 msgs   Rob Elder
• [Diy_efi] Part 2   Jerry Wills
• [Diy_efi] LS1 coils, smart or dumb?   arnie
• [Diy_efi] Fixed frequency PWM batch mode FI   Mike
• [Diy_efi] Re: Fixed frequency PWM batch mode FI   Marcell Gal
• [Diy_efi] idle control strategy for SD systems w/o bypass air control?   rr
• [Diy_efi] Re: Fixed frequency PWM batch mode FI   Marcell Gal
• [Diy_efi] Part 2   Bernd Felsche
• [Diy_efi] Fixed frequency PWM batch mode FI   bcroe at juno.com
• [Diy_efi] 4-wire O2 identification   Bernd Felsche
• [Diy_efi] Re: are uC requirements really that high?   Marcell Gal
• [Diy_efi] Fixed frequency PWM batch mode FI   Ron Schroeder
• [Diy_efi] default ignition tables   Marc Reibel
• [Diy_efi] Re: idle control strategy for SD systems w/o bypass air control?   Marcell Gal
• [Diy_efi] Re: if YOU were bored enough to disassemble...   Marcell Gal
• [Diy_efi] default ignition tables   Eck, Joel
• [Diy_efi] Re: are uC requirements really that high?   William Shurvinton
• [Diy_efi] Re: if YOU were bored enough to disassemble...   Dave Gallant, 12 Point Racing
• [Diy_efi] Fixed frequency PWM batch mode FI   Mike
• [Diy_efi] [ot] Twin tyres(A$)/tires(USD)   Mike
• [Diy_efi] default ignition tables   Dave Williams
• [Diy_efi] Chevy TBI Injector type   Keith Ballantyne
• [Diy_efi] Chevy TBI Injector type   romans, mark
• [Diy_efi] RE: Fixed frequency PWM batch mode FI   Les Dittert
• [Diy_efi] [ot] Twin tyres(A$)/tires(USD)   Ron Schroeder
• [Diy_efi] Fixed frequency PWM batch mode FI   Les Dittert
• [Diy_efi] Re: idle control strategy for SD systems w/o bypass air control?   Ron Schroeder
• [Diy_efi] Re: if YOU were bored enough to disassemble...   Brian Dessent
• [Diy_efi] idle control strategy for SD systems w/o bypass   socrace at ameritech.net
• [Diy_efi] ford y block   Don Chandler
• [Diy_efi] RE: Fixed frequency PWM batch mode FI   Ron Schroeder
• [Diy_efi] idle control strategy for SD systems w/o bypass air control?   pjr at teknology.net
• [Diy_efi] ford y block   Barry Tisdale
• [Diy_efi] dcoe to TBI   Djfreggens at aol.com
• [Diy_efi] Re: if YOU were bored enough to disassemble...   Dave Gallant, 12 Point Racing
• [Diy_efi] idle control strategy for SD systems w/o bypass air control?   Kent Martin
• [Diy_efi] dcoe to TBI   William Shurvinton
• [Diy_efi] dcoe to TBI   ptegler at cablespeed
• [Diy_efi] default ignition tables   Kent Martin
• [Diy_efi] Re: if YOU were bored enough to disassemble...   Brian Dessent
• [Diy_efi] 1984 Corvette ECM   Chuck Kahler
• [Diy_efi] idle control strategy for SD systems w/o bypass air control?   Tom Sharpe
• [Diy_efi] Re: if YOU were bored enough to disassemble...   Dave Gallant, 12 Point Racing
• [Diy_efi] Ideal fuel injection point   Derek
• [Diy_efi] dcoe to TBI   Dave Dahlgren
• [Diy_efi] Re: if YOU were bored enough to disassemble...   Brent Prindle
• [Diy_efi] Newbie question   E2002w at aol.com
• [Diy_efi] default ignition tables   Kent Martin
• [Diy_efi] dcoe to TBI   Djfreggens at aol.com
• [Diy_efi] Re: if YOU were bored enough to disassemble...   Brian Dessent
• [Diy_efi] 1984 Corvette ECM   bcroe at juno.com
• [Diy_efi] dcoe to TBI   ptegler at cablespeed
• [Diy_efi] idle control strategy for SD systems w/o bypass air   Mike R Brown
• [Diy_efi] 1984 Corvette ECM   steve ravet
• [Diy_efi] Newbie question   Djfreggens at aol.com
• [Diy_efi] Ideal fuel injection point   Djfreggens at aol.com
• [Diy_efi] Re: if YOU were bored enough to disassemble...   Dave Gallant, 12 Point Racing
• [Diy_efi] 1984 Corvette ECM   Bruce
• [Diy_efi] idle control strategy for SD systems w/o bypass   Mike
• [Diy_efi] 1984 Corvette ECM   rr
• [Diy_efi] dcoe to TBI   Eric Fahlgren
• [Diy_efi] 1984 Corvette ECM   Chuck Kahler
• [Diy_efi] dcoe to TBI   bill.shurvinton at nokia.com
• [Diy_efi] dcoe to TBI   bill.shurvinton at nokia.com
• [Diy_efi] scanning software for 1227749   Djfreggens at aol.com
• [Diy_efi] Formula   Mario Piquero
• [Diy_efi] dcoe to TBI   Scott F. Williams
• [Diy_efi] 1984 Corvette ECM   Chuck Kahler
• [Diy_efi] 1984 Corvette ECM   rr
• [Diy_efi] 1984 Corvette ECM   Programmer
• [Diy_efi] 1984 Corvette ECM   steve ravet
• [Diy_efi] scanning software for 1227749   Robert A. Ward Sr.
• [Diy_efi] scanning software for 1227749   Shannen Durphey
• [Diy_efi] Motronic fuel cut on excess boost??   Chris Wilson
• [Diy_efi] 1984 Corvette ECM   Shannen Durphey
• [Diy_efi] Formula   Mike
• [Diy_efi] scanning software for 1227749   Djfreggens at aol.com
• [Diy_efi] vara jection II   Simon F_R_E_D Rijs
• [Diy_efi] Motronic fuel cut on excess boost??   Perry Harrington
• [Diy_efi] Formula   Les Dittert
• [Diy_efi] WB psychosis   Jeff Feltman
• [Diy_efi] scanning software for 1227749   Djfreggens at aol.com
• [Diy_efi] 1984 Corvette ECM   Shannen Durphey
• [Diy_efi] Logging Data of DIY-WB parallel to LA3   Schaffer Klaus Maria
• [Diy_efi] Formula   Mike
• [Diy_efi] Motronic fuel cut on excess boost??   Chris Wilson
• [Diy_efi] Formula   Marteney, Steve
• [Diy_efi] WB psychosis   rr
• [Diy_efi] GEMS ECU Maps   Karl Doody
• [Diy_efi] Motronic fuel cut on excess boost??   Kenny W
• [Diy_efi] Motronic fuel cut on excess boost??   Kenny W

Last message date: Fri Aug 30 20:33:51 GMT 2002
Archived on: Thu May 30 06:02:34 GMT 2013

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...