[Diy_efi] Re: New toyota TCCS info

[Mos]

On 6 Aug 2002, Jerry Wills wrote:

> I have a 85 MR2 box, maybe california car, but might be just USA.
> 4A-G on the label, inside is a "40" pin dip which bares similar
> numbers to Simon's and yours. ND151801-1190    E356-0160 and then
> in smaller print 8452A, which looks to be a date code. If we do
> in fact have 40 and 42 pin dips with similar #s. We are aleast one
> oar short and have a big lake to cross.
> Please check those pin counts again.

AE86 4AGE *40* pin IC :)
175770-0032 01-2-135 8323 E13  -  dissimilar part number... :(
Crystal pins 2,3, gnd pin 1, power 4,5, (7?).

This one is ceramic cased with a 0.5" by 0.5" metal cover.
All ICs in the other ECUs specified in the previous post were incased in
the black resin.

> my box does jive with the 6801 data sheet as a possibility, there is
> no memory chip. its all internal and run in internal ROM/RAM mode.
> There is a 20 pin .4" package on the board, no data bus to it.

MF070?

There are a few ICs on this one: (descriptions from ic listing book).
NEC uPC451C quad op amp (14pin)
F(ujitsu?) MB4053 ADC 6 channel (16pin)
Toshiba TC4069 (hex inverter?) (14pin)
(Hitachi?) HA17901P quad comparator (14pin)

T2333? 9pin sil
And 2 ND 14pin DILs, and 2 ND sils (HC128, HE062).

I need to take a detailed look at the AE82 one because it appears to be a
lot different (from icq conversations).

Mos.


-- 
84 AE86, 90 ST185GrpA, 86 ST141, Sydney, Oz.




_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi