[Diy_efi] sequential injection timing

[bill.shurvinton at nokia.com]

probably, but I was trying to come up with a figure of merit that would =
be widely understood by listers and keep seeing HP/CI in US articles. =
But there is no single useful number that is of any use except when =
bragging to mates over a beer :-)

Really silly is the fact that Caterham now have a product range based on =
power/weight ratio, so you can buy a car with 300BHP/ton, 400 or 500. =
Problem is, in a 460kg car, the driver makes a 15-20% difference in the =
weight.

Bill

-----Original Message-----
From: ext huw scourfield [mailto:huw.scourfield at lineone.net]
Sent: 31 July 2002 16:34
To: diy_efi at diy-efi.org
Subject: Re: [Diy_efi] sequential injection timing


Bit pointless quoting F1 power levels IMHO, unless using equivalent rpm.
     Huw

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi